What to do in an emergency
Jump starting procedure
CAUTION
- AGM battery
(if equipped)
• Absorbent Glass Matt (AGM)
batteries are maintenance-
free and we recommend that
the AGM batteries be serviced
by an authorised Kia dealer.
For charging your AGM bat-
tery, use only fully automatic
battery chargers that are spe-
cially developed for AGM bat-
teries.
• When replacing the AGM bat-
tery, we recommend that you
use parts for replacement
from an authorised Kia dealer.
• Do not open or remove the
cap on top of the battery. This
may cause leaks of internal
electrolyte that could result in
severe injury.
• If the AGM battery is recon-
nected or replaced, ISG func-
tion will not operate immedi-
ately.
(Continued)
6
6
(Continued)
If you want to use the ISG
function, the battery sensor
needs to be calibrated for
approximately 4 hours with
the ignition off.
✽ ✽ NOTICE
If the battery is discharged, the
engine can be started using a battery
of another vehicle and two jumper
cables. Only use jumper cables with
fully insulated clamp handles.
To prevent personal injury or dam-
age to both vehicles, adhere strictly
to the following procedure.
1.Make sure the booster battery is
12-volt and that its negative termi-
nal is grounded.
2.If the booster battery is in another
vehicle, do not allow the vehicles to
touch.
3.Turn off all unnecessary electrical
loads.