Table of Contents
Advertisement
Adjusting the driver and passenger
side temperature equally
1. Press the DUAL button again to
deactivate DUAL mode. The pas-
senger side temperature will be
set to the same temperature as
the driver side.
2. Operate the driver side tempera-
ture control button. The driver and
passenger side temperature will
be adjusted equally.
Temperature conversion
You can switch the temperature
mode
between
Centigrade
Fahrenheit as follows:
Whilst pressing the OFF button,
press the AUTO button for 3 seconds
or more.
The
display
will
change
Centigrade to Fahrenheit, or from
Fahrenheit to Centigrade.
✽ ✽ NOTICE
• If the battery has been discharged
or disconnected, the temperature
mode
display
will
Centigrade.
• If you re-connect the battery after
it has been completely discharged
or after it has been disconnected
from the vehicle, the system will
be initiated and the display will
first show 22°C on the screen
which is the initial setting.
Features of your vehicle
Air intake control
■ Type A
to
from
This is used to select the outside
(fresh) air position or recirculated air
reset
to
position.
To change the air intake control posi-
tion, push the control button.
■ Type B
ORP042156
4 161
Advertisement
Table of Contents
