Table of Contents
Advertisement
Front light replacement
(1) Headlight (High)
(2) Static bending light
(3) Headlight (Low)
(4) Position light/Daytime running
light (DRL, LED Type)
(if equipped)
(5) Front turn signal light
(6) Front fog light (if equipped)
1. Turn off the engine and open the
hood.
2. Disconnect the power connector
front the back of the headlight
assembly.
ORP072026
Maintenance
Static bending light
Follow the steps 1 to 2 from the pre-
vious chapter.
3. Remove the headlight bulb cover
by turning it counterclockwise.
4. Disconnect the headlight bulb
socket-connector.
5. Unsnap the headlight bulb retain-
ing wire by depressing the end
and pushing it upward.
6. Remove the bulb from the head-
light assembly.
ORP072057
7 93
Advertisement
Table of Contents
