Fortress Technologies FWAD08M18 User Manual page 8

OPERATION INSTRUCTION
OPERATION INSTRUCTION
POWER:
Press the POWER button to turn the unit on/off.
(The TIMER button controls the auto stop feature of the unit.)
MODE:
Press the MODE
including AUTO, COOL, FAN and DRY. The green indicator light beside the "MODE"
button will illuminate to identify the mode selected.
When the unit is under the DRY and AUTO mode, the fan speed cannot be adjusted. The
fan speed is LOW in DRY mode and MED in AUTO mode. (Some models without MED
speed, the fan speed will be HIGH in AUTO mode.)
TEMPERATURE SETTING UP:
Press the button to increase the set (operating) temperature of the unit.
Each time the button is pressed the temperature increases 1 C (Celsius scale).
Maximum setting is 30 C.
TEMPERATURE SETTING DOWN:
Press the button to decrease the set (operating) temperature of the unit.
Each time the button is pressed the temperature decreases 1 C (Celsius Scale).
Minimum setting is 17 C.
FAN:
Press the "FAN" button to activate the fan speed setting. Each press of the button
will alternate through HIGH, MED, LOW, AUTO fan speed options.
The green indicator light beside the FAN speed option will illuminate to identify the fan
speed selected.
SWING:
Press the "SWING" button to activate the automatic oscillation feature. The
green indicator light adjacent to the "SWING" button will illuminate. The vertical louvers will
oscillate back and forth (side to side) automatically sweeping air alternately for comfortable
cooling. To stop the oscillation feature, press the "SWING" button again, the green
indicator light adjacent to the button will turn off.
Press the "SWING" button for 2 seconds will activate the SLEEP mode which can reduce
noise and create a comfortable sleeping environment.
TIMER:
First press the Timer button, the indicator light besides word on illuminates. It indicates
the Auto Start program is initiated.
Press or hold the Up(
up to 10 hours,then at 1 hour increments up to 24 hours. The control will count down
the time remaining until start.
button to select the appropriate operating mode. The mode selection
O
O
) or Down( ) to change the Auto time by 0.5 hour increments,
O
O
7