Table of Contents
Advertisement
Do not carry around or store this flash unit along with metal objects, such as coins and hairpins.
Do not attempt to disassemble this unit, or make an alteration or a short circuit on this flash unit.
Do not use this flash unit when it is wrapped.
Heat build-up may cause deformation of the flash unit or a fire.
Do not use this flash unit in a place subject to explosive or combustible gas.
If use of this flash unit causes radio interference with other devices, stop using the wireless functions.
Radio interference may cause malfunctions, resulting in incidents.
Place this flash unit on a stable place.
Placing the flash unit on a wobbling table or a tilted surface may cause the flash unit to fall off, resulting in injuries.
Before attaching this flash unit to a camera, make sure that the flash unit is not powered.
Attaching the powered flash unit to a camera may cause malfunctions or unexpected flashes, resulting in eye damage by strong light.
Maintenance
Remove this unit from the camera. Clean the flash with a dry soft cloth. If the flash has been in contact with sand, wiping will damage the
surface, and it should therefore be cleaned gently using a blower. In the event of stubborn stains, use a cloth lightly moistened with water or
tepid water, and then wipe the unit clean with a dry soft cloth. Never use strong solvents, such as thinner or benzine, as these damage the
surface finish.
If fingerprints or particles are stuck to the flashlamp, we recommend that you wipe it clean with a soft cloth.
4-735-263-12(1) Copyright 2018 Sony Corporation
83
Advertisement
Table of Contents
