Table of Contents
Advertisement
When flashing slowly
The batteries are running out of power. It is recommended that you replace the batteries.
The flash unit, however, is still capable of firing flashes in this state.
When flashing quickly
The flash unit is not capable of firing flashes. Replace the batteries.
Notes on continuous flashes
If you use the flash unit continuously for a short period of time, its built-in safety circuit will be triggered to limit flash firing and the flash
interval may be forced to extend.
In addition, if the temperature inside the flash unit rises further,
firing is disabled for a while. In such a case, turn off the power switch on the flash unit and leave the flash unit unused for about 10 minutes
to let it cool down.
Continuous flashes heat up the batteries inside the flash unit. Take extra care when you remove the batteries.
Related Topic
Warning indications
(overheat indicator) will light on the LCD panel to indicate that flash
4-735-263-12(1) Copyright 2018 Sony Corporation
32
Advertisement
Table of Contents
