Table of Contents
Advertisement
EVEN:
Flash coverage with priority given to wider periphery
Note
When you retract the wide panel, push it back all the way into the flash unit and make sure that [WIDE] is not displayed on the LCD panel.
When you pull out the built-in wide panel, do not apply excessive force as it may cause damage to the wide panel.
When you photograph the 2D subject from its front using a lens with the focal length of less than 18 mm, the periphery of the screen may appear slightly
darker because of the difference in intensity of the flash light at the center and periphery of the screen.
When you use a wide-angle lens with the focal length of less than 14 mm (in combination with HVL-F60RM/HVL-F60RM2) or 15 mm (in combination with
HVL-F46RM), the periphery of the screen may appear darker.
The focal length displayed on the LCD panel indicates the equivalent 35mm-format focal length.
This flash unit does not support the angle of view of a 16mm F2.8 Fisheye lens.
Before storing this flash unit in the supplied case, be sure to push the wide panel and the bounce sheet back into the unit.
Depending on the focal length specified for photography, the periphery of the screen may appear darker. In such a case, change the flash distribution
pattern.
Related Topic
Selecting the flash coverage manually <manual zoom>
4-735-263-12(1) Copyright 2018 Sony Corporation
64
Advertisement
Table of Contents
