Advertisement
(H5)
Step 3
(H4)
You will need
6 x Long Bolts
(H4)
1 x Small Allen Key
(H5)
(P6)
(Tool not provided)
Head screwdriver
(P6)
(P6)
Attach slats (P6) to centre-support bar (p4) with long bolts (H4) using the small allen key (H5) to tighten.
Then place in position on bed-frame as pictured.
Step 4
You will need
(H3)
(P7)
39 x Short Screws
(H3)
(Tool not provided)
Phillip head screwdriver
Put all slats (P6) into their position on the side rails and attach them to the side rails and
Centre support bar, using screws (H3) provided.
fantasticfurniture.com.au
Page 6
Advertisement
