Twist Ice (Depending On The Model) - Brandt ULN2510 Instruction Manual

Twist Ice (depending on the model)

Your freezer can be fitted with a "Twist Ice"
function.
This produces 24 ice cubes at the same
time. Remove the ice cubes drawer A by
pulling on the four sides.
- Fill the ice cube trays ¾ full with water
(Drawing R1). Filling them partially full
enables you to extract the ices cubes more
easily and avoids water spilling when you
are manipulating the drawer.
- Reinsert the drawer A (Drawing R2)
containing the ice cube trays filled with
water back into its housing and push it in
up to the stop.
- Wait at least 2 hours and then turn the
handles B (Drawing R3) clockwise up to the
point where you are pushing slightly
against the position of the limit switch on
rotation. This movement enables you to
bend the ice cube trays and make the ice
cubes fall into the ice cube drawer C
(Drawing R4) located just beneath.
- Let the handles return to rest position and
repeat the operation several times until all
the ice cubes have fallen into the drawer C
(Drawing R4).
- You can now pull out the ice cube drawer
by pulling the handle. The ice cubes are
ready for use. Return the ice cube draw C
to its housing, pushing it in fully up to the
stop.
A
C
36
drawing R1
A
drawing R2
drawing R3
B
drawing R4
EN