Sioux Tools GO459 Instructions-Parts List Manual

Sioux Tools GO459 Instructions-Parts List Manual

Geared orbital sanders
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

INSTRUCTIONS & PARTS LIST FOR GO459 SERIES GEARED ORBITAL SANDERS
Read and understand these instructions before operating this tool.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Power tools can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the
tool noise level is below 85 dBA. See the tool's information sheet for the noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a
physician. See the tool's information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Rotating sanding pads can cause cuts and abrasions.
Keep hands and other body parts away from sanding pads to prevent cutting or pinching. Wear protective clothing and gloves to
protect hands.
Contact with rotating sanding pads can cause injury.
Sanders present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories. Do
not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that could
become entangled with the tool.
Entanglements can cause injuries.
Sanding operations creates dust.
Do not breathe sanding dust. Use approved mask.
Breathing sanding dust can cause injury.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits. When drilling into walls, be aware that they may have hidden electric wires.
Electric shock can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Sanding metals creates sparks that can ignite flammable materials and vapors.
Only sand metals if the area is free of combustible or explosive materials or vapors.
Explosions and fire can cause injury.
Backing pads rotating at excessive speed can burst.
Check the speed printed on the backing pad. This speed must be greater than the nameplate speed of the sander. Do not exceed
rated operating air pressure.
Bursting backing pads can cause injury or death.
Sanders are not guarded for use with grinding wheels or cut off wheels.
Never mount a grinding wheel or cutoff wheel on a sander.
Unguarded grinding wheels and cut off wheels can cause injury.
Sanders can generate unexpected movement.
Keep a firm grip on the tool at all times. Be sure your body position allows you to have control of the tool at all times. Make sure
your footing is secure. When possible, secure the work piece in a vice or with clamps.
Unexpected tool movement can cause injury.
Using excessive force on a tool makes it hard to control.
Do not force tool.
Hard to control tool can cause injury.
Taping or wiring the throttle valve in the "ON" position will prevent the tool from shutting off if the tool should jam or malfunction or if
anything unexpected happens.
Do not wire or tape down the "On-Off" valve of any power tool.
Tools that are prevented from shutting off can cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
ZCE796
Form
SERIAL"A"
SAVE THESE INSTRUCTIONS!
WARNING
When used improperly power tools can create hazardous situations.
Improperly used power tools can cause injury or death.
GEARED ORBITAL SANDER SAFETY
Original
Instructions
1
Form ZCE796
Date 2013July29/C
Page 1 of 24
2013July29/C
Date

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GO459 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sioux Tools GO459

  • Page 1 Form ZCE796 Original Instructions Date 2013July29/C Page 1 of 24 INSTRUCTIONS & PARTS LIST FOR GO459 SERIES GEARED ORBITAL SANDERS SERIAL“A” Read and understand these instructions before operating this tool. SAVE THESE INSTRUCTIONS! WARNING When used improperly power tools can create hazardous situations.
  • Page 2 Tools that start unexpectedly can cause injury. The use of any accessory with this tool not provided or specified by Sioux Tools can perform unpredictably. Use only accessories provided or specified by Sioux Tools.
  • Page 3: Maintenance

    *per EN12096:1997, ISO 8662-8 DECLARATION OF CONFORMITY We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products GO459 Series to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:...
  • Page 4: Sicherheitshinweise Für Exzenterschleifer

    Übersetzung Der Original Anleitungen BEDIENUNGSANLEITUNG UND TEILELISTE FÜR EXZENTERSCHLEIFER DER SERIE GO459 SERIE“A” Lesen Sie diese Bedienungsanleitung, bevor Sie dieses Werkzeug in Betrieb nehmen. BEWAHREN SIE DIESE ANLEITUNG AUF! WARNUNG Unsachgemäßer Gebrauch von Werkzeugen kann zu gefährlichen Situationen führen. Jede Person, die dieses Werkzeug gebraucht, wartet, Zubehör auswechselt oder in der Nähe dieses Werkzeugs arbeitet, muss diese Sicherheitshinweise lesen, verstanden haben und befolgen! Unsachgemäßer Gebrauch von Werkzeugen kann zu Verletzungen oder zum Tod führen.
  • Page 5 Druckluftleitung abbaut. Werkzeuge, die unerwartet starten, können zu Verletzungen führen. Wenn bei diesem Werkzeug Zubehör eingesetzt wird, das nicht von Sioux Tools mitgeliefert oder angegeben wurde, kann sich das Werkzeug unvorhersehbar verhalten. Setzen Sie nur Zubehör ein, das von Sioux Tools geliefert oder angegeben wurde.
  • Page 6: Wartung

    *per EN12096:1997, ISO 8662-8 KONFORMITÄTSERKLÄRUNG Wir, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, erklären hiermit alleinverantwortlich, daß die Produkte GO459 Series auf die sich diese Erklärung bezieht, mit den Anforderungen der folgenden Standards oder Normen oder Dokumenten übereinstimmen: EN 792, ISO 12100-1, ISO 12100-2, EN ISO 15744, EN 12096:1997 , ISO 8662-8 gemäß...
  • Page 7 Traducción De Las Instrucciones Originales INSTRUCCIONES Y LISTA DE PARTES PARA LIJADORAS ORBITALES MECÁNICAS DE LA SERIE GO459 SERIE“A” Lea y entienda estas instrucciones antes de usar esta herramienta. ¡NO PIERDA ESTAS INSTRUCCIONES! ADVERTENCIA Una herramienta motorizada puede ser peligrosa si no se usa correctamente.
  • Page 8 El arranque inesperado de la herramienta podría provocar una lesión. La herramienta podría funcionar de forma impredecible si no se utilizan los accesorios que distribuye o recomienda Sioux Tools. Utilice sólo accesorios distribuidos o recomendados por Sioux Tools.
  • Page 9: Mantenimiento

    *según EN ISO 15744 *según EN12096:1997, ISO 8662-8 DECLARACION DE CONFORMIDAD Nosotros, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declaramos bajo nuestra única responsabilidad que los productos GO459 Series con los cuales se relaciona esta declaración están en conformidad con las siguiente(s) norma(s) u otro(s) documento(s) normativo(s):...
  • Page 10 Traduzione Delle Istruzioni Originali ISTRUZIONI E LISTINO PARTI PER LEVIGATRICI ORBITALI AD INGRANAGGI SERIALE GO459 SERIALE “A” Leggere attentamente queste istruzioni prima di usare l'attrezzo. CONSERVARE QUESTE ISTRUZIONI! AVVERTIMENTO Utensili a motore non usati correttamente possono creare condizioni di rischio..
  • Page 11 Gli utensili che si avviano inaspettatamente possono causare infortuni. L’uso di accessori con quest’utensile che non siano forniti o specificati da Sioux Tools può dar luogo a un funzionamento imprevedibile. Usare solamente accessori forniti o specificati da Sioux Tools.
  • Page 12: Manutenzione

    *secondo EN ISO 15744 *secondo EN12096:1997, ISO 8662-8 CERTIFICAZIONE DI CONFORMITA La Sioux Tools, Inc, con sede al 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, solennemente dichiara sotto la propria e sola responsabilità che i prodotti GO459 Series...
  • Page 13 Traduction Des Instructions Originales INSTRUCTIONS ET LISTE DE PIÈCES POUR PONCEUSE ORBITALE ROTATIVE - SÉRIE GO459 SÉRIE “A” Veuillez lire et comprendre ces instructions avant d'utiliser cet outil. CONSERVEZ CES INSTRUCTIONS ! AVERTISSEMENT Une utilisation incorrecte d’outils électriques risque d’engendrer des situations dangereuses.
  • Page 14 Le démarrage inattendu d’un outil peut provoquer des dommages corporels. L’utilisation avec cet outil d’un accessoire non fourni ou non spécifié par Sioux Tools risque d’entraîner un fonctionnement imprévisible. Utiliser exclusivement les accessoires fournis ou spécifiés par Sioux Tools.
  • Page 15: Entretien

    *selon la norme EN12096:1997, ISO 8662-8 DÉCLARATION DE CONFORMITÉ La société Sioux Tools, Inc., située à : 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, affirme que les produits GO459 Series dont cette fiche fait l’objet, sont conformes aux normes, documents normatifs et autres références :...
  • Page 16 Vertaling Van De Oorspronkelijke Instructies INSTRUCTIES EN ONDERDELENLIJST VOOR GO459 SERIE VLAKSCHUURMACHINE MET OVERBRENGING SERIE“A” Zorg dat u deze instructies hebt gelezen en begrepen voordat u dit gereedschap gebruikt. BEWAAR DEZE INSTRUCTIES! WAARSCHUWING Bij verkeerd gebruik kunnen elektrische werktuigen gevaarlijke situaties teweegbrengen.
  • Page 17 Werktuigen die onverwachts starten kunnen letsel veroorzaken. Accessoires met dit werktuig die niet geleverd of gespecificeerd zijn door Sioux Tools kunnen onvoorspelbaar werken. Gebruik alleen accessoires geleverd of gespecificeerd door Sioux Tools.
  • Page 18 *conform EN ISO 15744 *conform EN12096:1997, ISO 8662-8 CONFORMITEITSVERKLARING Ondergetekende, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, verklaart met inachtneming van de eigen aansprakelijkheid desbetreffend, dat de produkten GO459 Series waarop deze verklaring van toepassing is, conform zijn met de hierna genoemde norm, normen en/of andere regels en voorschriften:...
  • Page 19 Översätt Från Original Instruktionerna ANVISNINGAR OCH RESERVDELSLISTA FÖR VÄXLADE EXCENTERSLIPAR I SERIEN GO459 SERIE“A” Läs och förstå dessa anvisningar innan du använder detta verktyg. SPARA DESSA ANVISNINGAR! VARNING Felaktig användning av motordrivna verktyg kan förorsaka risksituationer. Alla som använder, underhåller, byter tillbehör på eller arbetar nära detta verktyg måste läsa, sätta sig in i och följa dessa säkerhetsanvisningar!
  • Page 20 Verktyg som startar oförväntat kan förorsaka personskada. Verktyget kan fungera på oberäkneligt sätt vid användning av tillbehör som inte tillhandahålls eller specificeras av Sioux Tools. Använd endast de tillbehör som tillhandahålls eller specificeras av Sioux Tools.
  • Page 21 *enligt EN12096:1997, ISO 8662-8 FÖRSÄKRAN OM ÖVERENSSTÄMMELSE Vi, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, förklarar under eget ansvar att produkterna GO459 Series som denna försäkran gäller uppfyller följande standard eller standarder eller andra normgivande dokument:...
  • Page 22 PARTS LIST FOR GO459 SERIES GEARED ORBITAL SANDERS SERIAL “A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Fig. Part Fig. Part Description Description Description GO459-29 Screw (4)* RO25-015 Protecting Rubber GO459-13 Rotor GO459-12 Rotor Blade (8)* GO459-31 Balancer 6"...
  • Page 23 NOTES ZCE796 2013July29/C Form Date...
  • Page 24 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. WARNUNG Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw.
  • Page 25 GO459-60SNH GO459-60SNP GO459-60SRH GO459-60SRP GO459-80SNH GO459-80SNP GO459-80SRH GO459-80SRP...

This manual is also suitable for:

Go459-60srp

Table of Contents