Sioux Tools SPS10P18 Instructions-Parts List Manual

INSTRUCTIONS & PARTS LIST FOR SPS10P18 PISTOL SANDER
Read and understand these instructions before operating this tool.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Sanders can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
This sander is not guarded for use with a grinding wheel.
Do not operate this sander with a grinding wheel.
Operating this sander with a grinding wheel can cause injury.
Sanding discs larger than 5" (127 mm) can fly apart if used on this sander.
Do not use sanding discs larger than 5" (127 mm) with this sander.
Sanding discs that fly apart can cause injury.
Only one sanding disc installed on this tool at a time can be properly tightened.
Do not install more than one sanding disc at one time.
Sanding discs that are not properly tightened can come off and cause injury.
Backing pads that are worn, damaged, nicked, bent, warped or burred can cause the sanding disk to tear and burst.
Do not use backing pads that are damaged, nicked, bent, warped or burred.
Sanding pads that burst can cause injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the
tool noise level is below 85 dBA. See the tool's information sheet for the noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a
physician. See the tool's information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Sanding pads and disks can cause cuts and abrasions.
Wear protective clothing and gloves to protect hands. Keep hands and other body parts away from sanding pads and disks to
prevent cutting or pinching.
Contact with sanding disks and pads can cause injury.
Sanders present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories. Do
not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that could
become entangled with the tool.
Entanglements can cause injuries.
Sander operations creates dust.
Do not breathe sanding dust. Use approved mask.
Breathing grinding dust can cause injury.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits.
Electric shock can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Sanding metal can create sparks which can ignite flammable materials or vapors.
Only sand metal if the area is free of combustible or explosive materials or vapors.
Explosions and fires can cause injury.
Sanders can generate unexpected movement.
Keep a firm grip on the tool at all times. Be sure your body position allows you to have control of the tool at all times. Make sure
your footing is secure. When possible, secure the work piece in a vice or with clamps.
Unexpected tool movement can cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
Form ZCE780A
SERIAL"B"
SAVE THESE INSTRUCTIONS!
WARNING
When used improperly power tools can create hazardous situations.
Improperly used power tools can cause injury or death.
SANDER SAFETY
1
Original
Instructions
Form ZCE780A
Date 2014November19/C
Page 1 of 24
Date 2014November19/C