Table of Contents
Advertisement
Step5: Complete the hardware installation as diagram at below.
3.2
Software Installation
There is no software driver or utility installation needed, but only the configuration
setting. Please refer to chapter 4 for software configuration.
Notice:
It will take about 50 seconds to complete the boot up sequence after powered on the Outdoor
Router; Power LED will be active, and after that the WLAN Activity LED will be flashing to show the
WLAN interface is enabled and working now.
4. Software configuration
There are web based management and configuration functions allowing you to have the jobs done
easily.
The Outdoor Router is delivered with the following factory default parameters on the Ethernet LAN
interfaces.
Default IP Address:
Default IP subnet mask:
WEB login User Name:
WEB login Password:
192.168.1.254
255.255.255.0
admin
admin
- 14 -
2.4G Outdoor Router
User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the LP-7316H and is the answer not in the manual?