Advertisement
7. Remote controller button functions
(1) ON/OFF button
Press to turn ON/OFF the Lossnay unit.
(2) SELECT button
Press to save the setting.
(3) RETURN button
Press to return to the previous screen.
(4) MENU button
Press to bring up the Main menu.
(5) Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on
and it will stay lit for a certain period of time depending on the screen.
(6) ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks
while the remote controller is starting up or when there is an error.
(7) Function buttons
Use to select the Ventilation mode and fan speed on the Main display.
Use to select items on other screens.
Note: When the backlight is off, pressing any button turns the backlight
on and does not perform its function. (except for the
Button operations on the Main menu
Main
Cursor
User options
Commissioning
Maintenance
Main display:
Cursor
F1
(3) RETURN button
(4) MENU button
(2) SELECT button
Main menu
F2
F3
F4
Pressing the
shown below.
(Refer to section 8.(2) "Main display" for details.)
User options
Commissioning
Maintenance
*1 Refer to the Instructions Book for details.
*2 Explained in this manual.
*3 If no buttons are pressed for 10 minutes (2 hours on
some screens), the screen will automatically return to
the Main display. Any settings that have not been saved
will be lost.
The available items on the menu depend on the connected
Lossnay unit model. For items not described in the manuals
that are enclosed with the remote controller, refer to the
manuals that came with the Lossnay units.
button)
Move the cursor to the desired function with the
tons, and press the
may be required.
The function of the
the setting screens.
Button function guide will appear at the bottom of the screens.
Note: If the function is not set in the function button, the function
button guide will not be displayed.
Eng-9
(5) Backlit LCD
(7) Function buttons
F1, F2, F3, and F4 from the left
(6) ON/OFF lamp
(1) ON/OFF button
button will bring up the Main menu as
*1, *3
*1, *2, *3
*1, *3
button to go to the next page. Password
,
, and
buttons will appear on
and
but-
Advertisement
