Advertisement
9. Initial setting menu (Remote controller settings)
<Administrator password is required.>
From the Main display, select Commissioning menu>Initial setting, and make the remote controller settings on the screen that appears.
Initial setting menu
Main/Sub
Clock
Contrast
Display details
Administrator password
Main menu:
Cursor
(1) Main/Sub setting
When connecting two remote controllers, one of them needs to be designated as a sub controller.
[Button operation]
[1] When the
or
Select "Sub", and press the
[2] Press the
button to return to the Main menu screen. (This button always brings up the Main
menu screen.)
(2) Clock setting
[Button operation]
[1] Move the cursor with the
[2] Change the date and time with the
The change will be reflected on the clock display on the Main display.
Note: Clock setting is necessary for setting the time, Fan speed timer, ON/OFF timer, Weekly timer,
Night-purge setting and Error history. Make sure to perform Clock setting when the product is
used for the first time.
(3) Display contrast
[Button operation]
Adjust LCD contrast with the
The current level is indicated with a triangle.
Note: Adjust the contrast to improve viewing in different lighting conditions or installation locations.
This setting can not improve viewing from all directions.
1/2
Main menu:
Page
button is pressed, the currently selected setting will appear highlighted.
button to save the change.
or
button to the desired item.
or
button, and press the
or
button.
Initial setting menu
Language selection
Cursor
Page
button to save the change.
Eng-11
Press the
,
,
2/2
cursor.
Press the
button to go to the next screen.
Select:
Select:
Main menu:
,
button to move the
Main/Sub
Main /
Sub
Cursor
Clock
yyyy/ mm/ dd
hh: mm
/
1 /
:
2 21
1
Cursor
Contrast
Light
Dark
Advertisement
