Advertisement
(5) Administrator password setting
[Button operation]
[1] To enter the current Administrator password (4 numerical digits), move the cursor to the digit you
want to change with the
button.
[2] Press the
button.
Note: The initial administrator password is "9999". Change the default password as necessary to
prevent unauthorized access. Have the password available for those who need it.
Note: If you forget your administrator password, you can initialize the password to the default
password "9999" by pressing and holding the
seconds on the administrator password setting screen.
[3] If the password matches, a window to enter a new password will appear. Enter a new password in
the same way as explained above, and press the
[4] Press the
button (OK) on the password change confirmation screen to save the change.
Press the
button (Cancel) to cancel the change.
Note: The administrator password is required to make the settings for Commissioning menus.
Refer to the Instruction Book for the detailed information about how to make the settings for
these items.
(6) Language selection
[Button operation]
Move the cursor to the language you desire with the
Press the
button to save the setting.
Note: Selectable language are different by each remote controller model.
or
button, and set each number (0 through 9) with the
and
button.
through
buttons simultaneously for three
buttons.
Eng-13
Administrator password
or
Enter administrator password
Select:
Cursor
Administrator password
Enter administrator password
Change administrator password.
Select:
Cursor
Administrator password
Enter administrator password
Update administrator password?
Language selection
English
Deutsch
Italiano
Svenska
Select:
Cursor
Language selection
Nederlands
Select:
Cursor
Cancel
OK
1/2
Français
Español
Português
Русский
Cursor
2/2
Cursor
Advertisement
