Changing A Stored Number; Adding The Emergency Number - Clarity C4210 User Manual

Changing a Stored Number

1. Unit must be in standby mode only.
2. Press MODE key twice.The display will show
PHONEBOOK for 1 second and then display
the first available record.
3. Press the UP (
to the record to be changed, e.g.ABC, 567
4. Press # key to change the phone record.
5. The display will show ENTER TO END and
the stored number 567 with the blinking
cursor after the digit 7.
6. Press any numeric key to add extra numbers.
Or
Press DEL/CH key to move the cursor to the
digit 7.Then press other numeric key to
replace 7.
7. Press ENTER after finishing the digits.
8. The display shows ABC with the cursor
blinking after the character C.
9. Press any numeric key 2 to 9 to add
extra characters.
Or
Press DEL/CH key to move the cursor back
to character C.Then press any other
numeric key to change this character.
10. Press ENTER to finish.The modified
characters and numbers will replace the
original phone record.
11. The display will show NUMBER STORED.

Adding the EMERGENCY Number

1. Unit must be in standby mode only.
2. Press MODE key twice.The display will show
PHONEBOOK for 1 second and then display
the first available record.
TELEPHONE OPERATIONS
) or DOWN (
▲ ▼
) button to go
29