Base Features; Ringer Volume; Ringer Style; Visual Ringers - Clarity C4210 User Manual

FEATURE SET UP
TELEPHONE BASE

Ringer Volume

The base ringer volume adjustments are located on
the side of the telephone base.
Pressing the UP ( ) key on the base increases the
▲
ringer sound by one level while pressing the DOWN
( ) key reduces the sound by one level.There are a
▼
total of six levels from maximum to minimum.The
ringer will sound for two (2) seconds while choosing
a ringer volume, to allow the user to make a choice.

Ringer Style

The base ringer style adjustments are located on the
side of the telephone base.The style of ring can be
adjusted by pressing the RING STYLE button. Six (6)
styles are available allowing you to customize your
ring. The ringer will sound for two (2) seconds while
choosing a ringer style, to allow the user to make a
choice.

Visual Ringers

Visual ringers are located in both the handset
antenna and the base of the telephone.When an
incoming call is received, these lights will flash.The
handset visual ringer will also stay lit while the phone
is in use.
BOOST ON/OFF Switch
This switch will disable the reset feature of the
BOOST Clarity Power button as follows:
ON – When the BOOST ON/OFF switch is set to
ON, the Boost function will be ON every time a call
starts, and will default to ON every time the phone
hangs up. During a call, the BOOST Clarity Power
button can toggle the Clarity Power ON or OFF
according to the user's needs.
21