Table of Contents
Advertisement
Settings for DVD
Player
You can change the settings for the DVD player
in the [Setup] menu.
Adjust the Setup Settings
1. Press MODE.
2. Select [DISC] option using b/B, and press
ENTER ( ).
3. Press SETUP. The [Setup] menu appears.
4. Use v/V to select the first setup option,
and press
to move to the second level.
B
5. Use v/V to select a second setup option,
and press
to move to the third level.
B
DP571M-N_Event_OM_Eng.indd 19
6. Use v/V to select a desired setting, and
press ENTER ( ) to confirm your selection.
[LANGUAGE] Menu
Menu Language
Select a language for the [Setup] menu and
on-screen display.
Disc Audio/Disc Subtitle/Disc Menu
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
To select another language. Use number
buttons then press ENTER ( ) to enter the
corresponding 4-digit number according to
the language code list on page 39.
If you make a mistake while entering
number, press CLEAR then correct it.
[Off] (Disc Subtitle only)
Turn off Subtitle.
NOTE
Depending on the disc, your language setting may
not work.
Installation
1
3
5/18/10 9:26:09 AM
Advertisement
Table of Contents
