Put the Battery into the Remote
Control
Pinch the battery holder clip together then pull
the tab to remove the battery holder. Insert the
battery with the + facing in the same direction
as the + on the battery holder. Replace the
battery holder with battery into the Remote
Control unit making sure that it is fully inserted.
•
Replace Remote Control unit battery with
3 V micro lithium cells such as CR. 2025 or its
equivalent.
•
Dispose of battery safety in accordance with
local laws. Do not dispose of in fire.
Warning
The battery used in this device may present a fire
or chemical burn hazard if mistreated. Do not
recharge, disassemble, incinerate, or heat above
100 °C (212 °F).
Replace the battery with Matsushita Elec. Ind. Co.,
Ltd. (Panasonic), part no. CR. 2025 only.
Use of another battery may present a risk of fire or
explosion. Dispose of used batteries. Keep batteries
away from children. Do not disassemble or dispose
of in fire.
DP571M-N_Event_OM_Eng.indd 13
Preparation
1
2
5/18/10 9:26:03 AM