4.
Press (C).
5.
Use (D) to change the summer time
setting.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 5553
Setting the Time/Date
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when [SET] starts to
flash.
3.
Use (C) to display the setting you want to
change.
Each press of (C) cycles through
●
settings in the sequence shown below.
Home City
Summer time
12/24-hour timekeeping
Seconds
Hours
Minutes
Year
Month
Day
Operation tone enable/disable
Illumination duration
4.
Configure the date and time settings.
While the seconds are flashing,
●
pressing (D) will reset them to 00. 1 is
added to the minutes when the current
seconds count is between 30 and 59
seconds.
For all the other settings, use (B) and (D)
●
to change the flashing setting.
Holding down (B) or (D) scrolls through
settings at high speed.
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
9