Cleaning The Dust Bag; Optional Accessories - Makita DVC265 Instruction Manual

1. Open the lid and take out the filter bag. Release
the hook on the filter and remove it from the vacuum
cleaner body.
► Fig.44
2.
Beat the dust off from the filter. The filter can be
washed with water. Rinse away the dust and particles
on the filter every 1 or 2 month. After that, dry the filter
completely in a shaded and well-ventilated place to
prevent unpleasant odor or malfunctions.
3. To install the filter, insert the side without the flap
into the holder then push the filter downward until the
flap is secured by the rib.
► Fig.45: 1. Holder 2. HEPA filter 3. Rib 4. Flap

Cleaning the dust bag

Regularly clean the dust bag with soap and water. Turn
the dust bag inside out and remove the sticky dust.
Wash lightly by hand and rinse well with water. Dry
completely before installing to the vacuum cleaner.
► Fig.46
NOTICE:
Wet dust bag lowers the vacuuming per-
formance as well as the life of the motor.
OPTIONAL
ACCESSORIES
These accessories or attachments
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Hose (for dust extraction type)
• Hose (for vacuum cleaner type)
• Extension wand
• Free nozzle
• T-shape nozzle
• Seat nozzle
• Corner nozzle
• Shelf brush
• Round brush
• Filter bag
• Dust bag
• Front cuff
• HEPA filter
• Wireless unit
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
20 ENGLISH