Data/Fax; Pc Connection; Mode(1X/Qnc) (Menu; Pap Id - LG LGBP6100 Manual

Data/Fax (Menu
Allows you to use your phone to transmit data and faxes.
1. Press , ,
2. Use to select a setting, then press
Off / Fax In Once / Fax In Always / Data In Once / Data
In Always
N N O O T T E E The Data Connection Kit allows you to connect your
PC or PDA to your LG wireless phone, freeing you
from having to locate a telephone outlet. You can
send or receive an e-mail, a fax, or access the
Internet anytime, anywhere.
PC Connection (Menu
Allows you to set the data port and port speed. Set the port
speed based on your carrier's network. Contact your carrier to
determine the maximum available speed.
1. Press , ,
2. Use to select a setting, then press
USB / RS-232C(COM Port) / Closed
)
,
.
.
)
,
.
.
N N O O T T E E When using 1X HSPD data service via an RS-
232C data cable, the port speed is set to 115,200
(230,400 is not supported). When using 1X HSPD
data service via a USB data cable, you may get
better port speed if the port speed is set to
230,400 rather than 115,200.

Mode(1X/QNC) (Menu

This is setting enables you to set the speed for WAP, BREW
and Tethered Mode.
1. Press , ,
2. Use to select a setting, then press
Auto / 1X / QNC
N N O O T T E E When flip is closed, you can press
Dial Key) for three seconds to set Driving Mode.
PAP ID (Menu
It is the user's ID for PPP Authentication Protocol.
1. Press , ,
2. Enter a PAP ID and press
Settings
)
,
.
.
(Voice
)
,
.
.
BP6100
71