Table of Contents
Advertisement
Step 3. Secure mounting hardware
2B
2C
Step 4. Connect waterlines to main valve
Adjust direction of faucet
body (1) so that handle is on
right side of faucet. Tighten
mounting nut (2B) until snug.
Tighten mounting screws
(2C) to nut with Phillips
screwdriver until snug.
Attach waterlines (3) to
angle stops and tighten
until snug. Turn on angles
stops and check for leaks.
(DO NOT TURN FAUCET
ON)
NOTE: Please make sure filter
washers are installed before
connecting to the main valve.
8
Advertisement
Table of Contents
