Cleaning the print head
If the printed nozzle check pattern is broken, missing, or a specific colour is not printed, clean the
print head.
NOTE
• Cleaning the print head consumes a small amount of ink. Cleaning too often reduces the amount of ink in
the ink tanks.
• Your machine performs print head cleaning every time you plug in the power cord. The machine also
performs the cleaning periodically when it is ON.
•
You can also clean the print head from your computer. (See Software Guide.)
PC
Follow this procedure:
1
Press [Additional Functions].
2
Use [ ] or [ ] to select <2.MAINTENANCE>.
3
Press [OK/Set].
4
Use [ ] or [ ] to select <2.CLEANING> or <3.HEAD REFRESHING> as
necessary.
Ex:
MAINTENANCE
2.CLEANING
– <CLEANING>:
– <HEAD REFRESHING>: Performs deep print head cleaning.
5
Press [OK/Set].
Ex:
CLEANING
IMPORTANT
• If normal print head cleaning does not result in improvement, perform deep print head
cleaning.
Chapter 10
Performs normal print head cleaning.
Maintenance
107