W6 N 8000 Exklusive Instruction Manual
  1. Manuals
  2. Brands
  3. W6 Manuals
  4. Sewing Machine
  5. N 8000 Exklusive
  6. Instruction manual

W6 N 8000 Exklusive Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Sewing machine W6 N 8000 Exklusive
Instruction manual
1

Advertisement

Table of Contents
loading

Related Manuals for W6 N 8000 Exklusive

Summary of Contents for W6 N 8000 Exklusive

  • Page 1 Sewing machine W6 N 8000 Exklusive Instruction manual...
  • Page 2 Please access our website using www.w6-wertarbeit.de and under Service / Help select: Criteria for the optimal threading of a W6 N 8000 Exklusive • (4-min. video). A tutorial video specifically for the W6 N 8000 Exklusive.

  • Page 3: Table Of Contents

    Contents Inhaltsverzeichnis 1 Safety notes....................6 1.1 Notes for operational safety..............6 1.2 Instructions for use................6 1.3 After sewing..................7 1.4 Tips for a long service life..............7 1.5 What we expect from you..............8 2 Assembling the machine................9 2.1 Unpacking...................9 2.2 Setting up..................10 2.3 Connecting the machine..............10 2.4 Unplugging the power plug...............12 2.5 Information on the embroidery unit...........13 3 Getting to know the machine..............15...
  • Page 4 7.1 Checking the needle.................45 7.2 Inserting a needle................46 7.3 Needle and thread table..............47 8 Inserting the bobbin.................50 8.1 Why use W6 bobbins?..............50 8.2 Removing the bobbin................50 8.3 Winding the bobbin................51 8.4 Inserting a plastic bobbin in the hook race........53 8.5 Using the upper thread to pull up the lower thread......55 9 What do I do with the upper thread?............57...
  • Page 5 12.2 Maintenance to be carried out by the customer......160 12.2.1 Checking the needle plate.............160 12.2.2 Checking the needle / Why using W6 needles is important? 160 12.2.3 Cleaning the hook, hook race and feed dogs......161 12.2.4 Checking the hook system for damage.........163 12.2.5 Checking the hook race for damage........164...

  • Page 6: Safety Notes

    Notes for operational safety Safety notes Safety notes This section contains information on how to use the manual: Notes for operational safety (Section 1.1) • Instructions for use (Section 1.2) • After sewing (Section 1.3) • Tips for a long service life (Section 1.4) •...

  • Page 7: After Sewing

    • Based on its design, the machine is not intended for commercial use. • Have it inspected by a W6 workshop (this may result in additional costs). • Frequent sewers should send the machine in for an annual inspection •...

  • Page 8: What We Expect From You

    Only allow an authorised workshop to work on electrical components. • W6 WERTARBEIT also offers the following options on its website for free. Please access our website using www.w6-wertarbeit.de and under HELP select: Criteria for the optimal threading of a W6 N 8000 Exklusive video.

  • Page 9: Assembling The Machine

    Information on the embroidery unit (Section 2.5) • Unpacking You are responsible for shipping the machine for inspection or repair to a W6 specialist workshop. To avoid any damage, please send the machine in its original packaging. We therefore recommend that the packaging material, including polystyrene, be stored.

  • Page 10: Setting Up

    Setting up Assembling the machine Setting up When setting up, please pay attention to the following points: The supporting surface must be sturdy, non-slip and of adequate size. • There is adequate lighting for work. • Your seat ensures a convenient and ergonomically sound posture when •...
  • Page 11 Connecting the machine Assembling the machine Carry out the following steps: Place the machine on a sturdy, non-slip and adequately sized table. Plug the power plug into the sewing machine socket. Plug the power plug into the power socket. Plug the foot controller plug into the sewing machine socket.

  • Page 12: Unplugging The Power Plug

    Unplugging the power plug Assembling the machine Set the on / off switch to the “I” (ON) position. The machine is switched on. ➔ ➔ The lighting is switched on. The machine does not sew? The machine is not connected correctly. ➔...

  • Page 13: Information On The Embroidery Unit

    With the W6 embroidery software, you can also easily create any customised embroidery you fancy. A basic W6 embroidery software is included in the embroidery unit price. Data is transferred from the embroidery software to the embroidery unit using a USB stick.
  • Page 14 Information on the embroidery unit Assembling the machine 3) Switch the sewing machine on after attaching the embroidery unit. The thread tension is shown on the sewing machine’s LCD display when using the embroidery unit. You can adjust the thread tension using the buttons on the control panel.

  • Page 15: Getting To Know The Machine

    Front view Getting to know the machine Getting to know the machine This section will familiarise you with the machine parts and what they are called: Front view (Section 3.1) • View of the presser foot, automatic needle threader and needle plate •...

  • Page 16: Front View

    Front view Getting to know the machine Front view No. Designation 01 Needle Up / Down / Slow Sewing button (See notes, Section 5.3) 02 Thread Cutter button 03 Speed control 04 Top cover 05 LCD display 06 Control panel 07 Hand wheel 08 Adjustable foot pressure dial 09 Light cover (not visible)

  • Page 17: View Of The Presser Foot, Automatic Needle Threader And Needle Plate

    Rear view Getting to know the machine View of the presser foot, automatic needle threader and needle plate No. Designation 14 Manual thread cutter 15 Hole for magnifier 16 Lowerable buttonhole lever 17 Lowerable needle threader lever 18 Needle threader 19 Presser foot holder 20 Presser foot 21 Feed dogs...

  • Page 18: Top View

    Top view Getting to know the machine Guide lines on the needle plate indicate the distance from the centre needle position. To stick to the seam allowance width, guide the fabric edge along this guide line. Top view Lift the top of the head cover to open the top cover. No.
  • Page 19 Top view Getting to know the machine Machine parts No. Designation 44 Handle 45 Manual thread cutter 46 Presser foot lifter 47 Connection for embroidery unit 48 Power switch (On / Off) 49 Power cable connection socket 50 Foot controller socket 51 Foot controller 52 Power cable...

  • Page 20: Rear View

    Rear view Getting to know the machine Rear view No. Designation 53 Drop feed lever (The drop feed lever can only be accessed when the extension table has been removed.) Extension table Extension table Opening the accessory compartment Grab the front / rear compartment and pull it out. a: Front compartment b: Rear compartment...

  • Page 21: Removing The Extension Table

    Extension table Getting to know the machine Removing the extension table Removing the extension table Reach into the extension table with your finger on the bottom left and pull it to the left. Slide it to the right to insert. Free arm sewing Simply remove the extension table for free arm sewing.

  • Page 22: Connecting The Machine

    Connecting the machine Getting to know the machine Connecting the machine Place the machine on a sturdy table. Plug the power cable with the two-pin plug into the sewing machine socket. Plug the power plug into the power socket. Switch on the power switch. A light comes on when the switch is turned on.

  • Page 23: Foot Controller

    Foot controller Getting to know the machine Foot controller The foot controller allows you to control the speed using your foot. When the foot controller is plugged in, the Start / Stop button is disabled. Switch off the power switch (O symbol).

  • Page 24: Accessories

    Spool cap (small) for W6 spools On the accessory shelf (front compartment) Picture Designation Satin stitch foot Overcasting / overlock foot Blind hem foot Button foot Zipper foot Screwdriver for needle plate Four W6 plastic bobbins (one in the machine) Seam ripper...
  • Page 25 Accessories Under the accessory shelf (front compartment) Lift the shelf (a) by the tab (b). There is a compartment underneath. Picture Designation Screwdriver Brush Quilting bar Spool cap (large) Felt washer Extra spool pin (external) to attach to the winder (see Section 3.3 no.
  • Page 26 Magnifier Accessories Magnifier With the magnifier you can see the needle area better or it can be used to help with threading. Attaching the magnifier Hold the magnifier holder (a) and insert the pin (b) into the hole for the magnifier (c) until it stops.
  • Page 27 Knee lifter Accessories Removing the magnifier Grab holder pull magnifier out downwards. DANGER Accident prevention. Do not look at the sun through the magnifier. There is a risk of blindness. WARNING Reducing the fire hazard. Do not leave the magnifier in direct sunlight. This can cause a fire. Knee lifter By attaching the knee lifter to the machine, you can raise or lower the presser foot with your knee.
  • Page 28 Knee lifter Accessories Dust cover Cover the machine with the dust cover when not in use. b: Extra storage compartment NOTE: Do not remove the polystyrene (a) from the inside of the dust cover.

  • Page 29: Operating Elements

    Operating elements Operating elements This section contains information on the machine’s operating elements: Start / Stop button (Section 5.1) • Reverse button (Section 5.2) • Needle Up / Down / Slow Sewing button (Section 5.3) • Thread Cutter button (Section 5.4) •...

  • Page 30: Start / Stop Button

    Start / Stop button Operating elements Start / Stop button (A) The machine starts when the Start / Stop button is pressed and stops when it is pressed again. The machine starts slowly at the beginning of the sewing process. Indicator light Green “ON”...

  • Page 31: Needle Up / Down / Slow Sewing Button

    When NOT sewing, the needle stop position changes to up or down when this button is pressed. Please note: Only use thread tension-friendly and lint-free W6 thread. • Always press the Needle Up / Needle Down button before threading. •...

  • Page 32: Presser Foot Lifter

    The lever should be in this position for most sewing operations. For darning or embroidering with the W6 embroidery unit or if the fabric is to be moved by hand, move the drop feed lever to the left to lower the feed dogs.

  • Page 33: Thread Tension Dial

    Thread tension dial Operating elements Thread tension dial (H) The right tension is required to transport the fabric correctly when sewing. The presser foot setting is mainly determined by the weight of the fabric being sewn. The tension is reduced for light fabrics, such as curtains, batiste, voile, etc. The tension is increased for heavy fabrics such as denim or canvas.
  • Page 34 Start screen Operating elements Memory Read button (C) This sewing machine can store a combination of decorative / letter stitches. Press this button to call up the stored decorative / letter stitches. Help button (D) Use this button to find out how to wind, insert the bobbin, thread the upper thread and change the presser foot.

  • Page 35: Using The Help Button

    Using the Help button Operating elements LED light (h3) Press the ON button to switch the LED light on. Press the OFF button to switch the LED light off. Once you have carried out all the settings, press the Start button or Return button.

  • Page 36: Utility Stitch Selection

    Utility stitch selection Operating elements You can view the instruction again by pressing the ( ) button. To view the next instruction, press the ( ) button. To view the previous instruction, press the ( ) button. You can operate the machine and see the instructions at the same time. The ( ) button disappears once the last instruction has been completed.

  • Page 37: Selecting Other Utility Stitches

    Selecting other utility stitches Operating elements 5.12 Selecting other utility stitches Press the Utility Stitch button on the Start screen. The first Stitch Selection screen is displayed. There are four Stitch Selection screens. Press the ( ) or ( ) button to select the appropriate screen. Press the stitch button straight away.

  • Page 38: Stitch Settings Screen

    Stitch Settings screen Operating elements 5.13 Stitch Settings screen If, for example, you select stitch 19, the display shows the Stitch Settings screen. Stitch number (A) Pattern (B) The pattern is altered depending on the setting (width, length, mirroring and stretching).
  • Page 39 Stitch Settings screen Operating elements Select the pattern. Press the Tie-off / Cut button twice if you want to sew tie- off stitches and cut the threads. is shown on the LCD display. You can cancel it by pressing this button again. Start sewing.
  • Page 40 Stitch Settings screen Operating elements Stitch width (F) The preset stitch width is displayed in green when the stitch is selected. You can change them by pressing the [+] or [-] button. Needle position When the straight stitch (no. 1–4, 7–11) is selected, the needle position is displayed.

  • Page 41: Stitch Settings Screen (Mirror / Stretch)

    Stitch Settings screen (mirror / stretch) Operating elements 5.14 Stitch Settings screen (mirror / stretch) When you press the Mirror / Stretch button, the Edit screen goes into mirror / stretch mode. Stitch width, length and thread tension (A) Mirror button (B) By pressing this button the stitch is mirrored as follows.

  • Page 42: Stitch Settings Screen (Thread Tension)

    The W6 machines’ factory settings are ideal. 95% of all errors occur due to threading the sewing machine incorrectly. W6: Optimal Threading video on the W6 website under Service / Help / W6 N 8000 Exklusive / Videos. Changing the presser foot...

  • Page 43: Changing The Presser Foot And Presser Foot Holder

    Changing the presser foot and presser foot holder The presser foot must be changed to suit the selected pattern or project. Changing the presser foot (Section 6.1) • Changing the presser foot holder (Section 6.2) • Changing the presser foot Use the correct presser foot for each pattern or purpose.

  • Page 44: Changing The Presser Foot Holder

    Changing the presser foot holder Changing the presser foot and presser foot holder Lower the presser foot lifter and the presser foot will engage in place. The bar fits into the holder. If it is not fully inserted, try pressing the lever to release the presser foot.

  • Page 45: Selecting The Needle

    This results in the sewing thread breaking, being damaged or the sewing machine skipping stitches. For safety’s sake, always use original W6 WERTARBEIT needles. Checking the needle Safety instruction: Use of needles Only use W6 WERTARBEIT 130/705 H system needles.

  • Page 46: Inserting A Needle

    Inserting a needle Selecting the needle Inserting a needle PLEASE NOTE Accident prevention. Switch off the power switch before carrying out the following procedure. If you place a cloth on the metal needle plate, you prevent the needle from falling into the machine.

  • Page 47: Needle And Thread Table

    • Always use thread of the same weight and the same material for the • upper and lower threads. Only use sharp, straight, undamaged and high quality W6 needles for • your sewing. Note To sew the best pattern, it is necessary to adapt the patterns on a sewing machine with a stitch width of 6 mm to the fabrics to be sewn with regard to stitch width and stitch length.
  • Page 48 Needle and thread table Selecting the needle Needle selection Weight Fabric Needle type Needle size Very Chiffon, crêpe de chine, Silk crêpe, 7HAx1GT light sheer crêpe Georgette Light Silk, crêpe de chine, Silk crêpe, 7HAx1GT sheer crêpe Georgette Medium Chambray, handkerchief linen, Blue Tip gingham, challis percale, wool crêpe, pure silk, taffeta...
  • Page 49 Needle and thread table Selecting the needle The following table provides an overview of the special needles. Special needles Type Application Needle size Quilting Topstitching and quilting 75–90 Super Stretch Sewing stretch and 75–90 HAx1SP non-stretch fabrics Microtex For microfibre 60–70 Titanium Embroidery or for extremely demanding...

  • Page 50: Inserting The Bobbin

    • Why use W6 bobbins? Only W6 plastic bobbins fit perfectly in your W6 sewing machine. Bobbins made by other manufacturers and metal bobbins do not fit and lead to a seam with an unsatisfactory appearance or damage to the machine.

  • Page 51: Winding The Bobbin

    Winding the bobbin Inserting the bobbin Winding a new W6 plastic bobbin Inserting the bobbin Winding the bobbin Open the top cover. Place the bobbin on the bobbin winder spindle so that the notch (a) in the bobbin fits on the spindle’s spring (b).
  • Page 52 Winding the bobbin Inserting the bobbin Guide the thread to the back and thread it through the thread guide (e) from left to right. Guide the thread to the right and thread it through the thread guide from the back. Guide the thread anti-clockwise under the tension disc. Hold the thread with your left hand and wind the thread around the bobbin 4 to 5 times.

  • Page 53: Inserting A Plastic Bobbin In The Hook Race

    Winding the bobbin Inserting the bobbin Start the machine by pressing the Start / Stop button or by pressing the foot pedal. The winding process stops automatically when the bobbin is full. (Release the pedal.) Slide the bobbin and spindle to the left. Take the bobbin off the spindle. Hook the thread into the thread cutter (g) from the rear on the left and pull forwards to the right.
  • Page 54 Inserting a plastic bobbin in the hook race Inserting the bobbin Insert the plastic bobbin with the “C” shape into the hook race. Using the index finger on your right hand, hold the plastic bobbin tight and guide the thread through the slot of the hook race keeping it taut. The slot is located at the 7 o'clock position.

  • Page 55: Using The Upper Thread To Pull Up The Lower Thread

    W6 tip On the W6 WERTARBEIT website you will find assistance under Service / Help / W6 N 8000 Exklusive / Videos: Optimal Threading (approx. 4 minutes long). Using the upper thread to pull up the lower thread Set the presser foot lever to the upper position.
  • Page 56 ➔ Turn the spool and invert it on the spool pin. Always place the spool in a horizontal (lying) position. ➔ ➔ Only use W6 thread. Close the hook race with the plastic bobbin cover. The bobbin cover is in the correct position...

  • Page 57: What Do I Do With The Upper Thread

    Threading the upper thread What do I do with the upper thread? What do I do with the upper thread? Threading the upper thread (Section 9.1) • Using the needle threader (Section 9.2) • Using the upper thread to pull up the lower thread (Section 9.3) •...
  • Page 58 Threading the upper thread What do I do with the upper thread? Push the small spool cap (a) tightly onto the spool (b). The spool must run and lie smoothly without sticking. Unwind approx. 30 cm of thread from the spool. Hold the thread on the spool taut.
  • Page 59 Threading the upper thread What do I do with the upper thread? To thread the concealed thread take-up lever, pull the thread up taut and guide it down again from right to left through the slot. Pull the thread taut through the slot down towards 6 to the metal needle clamp.

  • Page 60: Using The Needle Threader

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 61 Using the needle threader What do I do with the upper thread? Pull the thread through the needle threader (a) and to the right. Pull the thread into the guide (b). The thread hooks into (c). Hook the thread into the thread cutter (d) from the back to front. Pull to cut the thread.

  • Page 62: Using The Upper Thread To Pull Up The Lower Thread

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 63 ➔ Turn the spool and invert it on the spool pin. ➔ Always place the spool in a horizontal (lying) position. ➔ Only use W6 thread. Close the hook race with the plastic bobbin cover. The bobbin cover is in the correct position if it clicks into place when inserted.

  • Page 64: Sewing A Test Seam

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 65 Sewing a test seam using straight stitch as an example Sewing a test seam Check the presser foot (standard foot). See the section on changing the presser foot. Place the fabric under the presser foot and lower it. The indicator light is now green. Hold the upper thread behind the needle and press the Start / Stop button or the foot pedal.
  • Page 66 Sewing a test seam using straight stitch as an example Sewing a test seam Press the Thread Cutter button. When the needle stop position ➔ is down: the threads are cut and the needle goes up. In this case the stop position setting does not change even if the needle goes up.

  • Page 67: Backtacking Options

    Sewing a test seam using straight stitch as an example Backtacking options Thread cutter If you are not using the Thread Cutter button after sewing, you can cut the threads using the manual thread cutter. Raise the presser foot and pull the fabric and threads back after sewing. Hook the threads into the thread cutter from the back to the front.

  • Page 68: 10.2.2 Automatic Tie-Off, Automatic Tie-Off And Cut

    Sewing a test seam using straight stitch as an example Backtacking options When you have reached the end of the seam, press and hold the Reverse button and sew 4 to 5 stitches in reverse. NOTE: When the foot controller is connected and the pedal is pressed, the machine sews in reverse as long as the button is pressed.
  • Page 69 Sewing a test seam using straight stitch as an example Backtacking options When you have reached the end of the seam, press the Reverse button once. The machine sews tie-off stitches and stops automatically. The machine sews tie-off stitches, cuts the threads and stops automatically. Automatic tie-off: utility stitch no.

  • Page 70: Using A Pattern

    Using a pattern Using a pattern To keep the W6 instructions up-to-date at all times, we offer you our W6 practical tips on the W6 Wertarbeit website under Sewing Ideas. Have a look at the sewing ideas page and be inspired.

  • Page 71: Overview Of Patterns

    The following table shows all patterns offered by the machine with what they are called and their settings for practical application. Similarly, the correct presser foot as well as the recommended W6 needle size are noted for each pattern. Designation Program Program no.
  • Page 72 Pattern overview Using a pattern Designation Program Program no. Presser foot / Needle / Prerequisites Quilting 09–11 Presser foot: W6 standard foot or stitches 26–29 W6 special feet Utility 31–34 stitches Prerequisite: 44–47 Use thread tension-friendly and lint- free W6 thread / W6 multi-coloured thread.
  • Page 74 Pattern overview Using a pattern Designation Program Program no. Presser foot / Needle / Prerequisites Antique and Presser foot: W6 satin stitch foot or nostalgia W6 open-toe satin stitch foot Utility stitches 39–43 stitches Prerequisite: Place W6 stabiliser or W6 decorative stabiliser under the fabric to secure the fabric.
  • Page 75 Pattern overview Using a pattern Designation Program Program no. Presser foot Needle Decorative Presser foot: W6 satin stitch foot or stitches 23–26 W6 open-toe satin stitch foot 35–40 46–81 Prerequisite: 104–108 Place W6 stabiliser or W6 decorative stabiliser under the fabric to secure the fabric.
  • Page 76 Using a pattern Designation Program Program no. Presser foot Needle Satin stitches 80–103 Presser foot: W6 satin stitch foot or W6 open-toe satin stitch foot Decorative stitches Prerequisite: Place W6 stabiliser or W6 decorative stabiliser under the fabric to secure the fabric. Use...
  • Page 77 Using a pattern Using a pattern Pattern index Designation Program Pattern Presser foot Needle / always use a stabiliser Letters, W6 Top Stitch numerals and always use a special stabiliser characters Or W6 open-toe satin stitch foot Decorative (available as an...

  • Page 78: Straight Stitches

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 79 3. In the case of thicker, non-stretch fabrics, e.g. denim = length 4–5. • Use a W6 Super Stretch 90 (HAx1SP) needle for stretch and non-stretch fabrics, or a W6 Super Stretch 75 (HAx1SP) needle for thinner fabrics. Straight stitch Place the fabric under the presser foot.
  • Page 80 Utility stitches Using a pattern Straight stitch with automatic reverse stitch – programs 03 and 04 Place the fabric under the presser foot. Lower the presser foot. Hold the upper thread loosely and start sewing. The machine sews 4 to 5 stitches forwards, then 4 to 5 stitches backwards and then continues sewing forwards.

  • Page 81: Stretch Straight Stitch

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...

  • Page 82: Triple Pierced Seat Seam

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...

  • Page 83: Quilting Stitches

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...

  • Page 84: Zigzag Stitch

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...

  • Page 85: Flat Stitch

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...

  • Page 86: Stretch Zigzag Stitch

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 87 90 or 75 needles (HAx1SP) Thread tension setting Automatic W6 note: The stitch length and stitch width can be changed manually in the specified ranges. Sewing on elastic / Smocking: Carry out the following steps: Sew the fabric on the wrong side.

  • Page 88: Overcasting / Overlock

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 89 Select the following settings: Designation Prog. Pattern Application Presser Needle size Needle foot position Stretch Overlocking fabric W6 90 or 75 Zigzag stitch edges; overcasting Super Stretch prevents (HAx1SP) the fabric edges from fraying Thread tension setting Automatic Select the following settings: Designation Prog.
  • Page 90 If you are sewing in the middle of the fabric, you must use the standard foot.
  • Page 91 Utility stitches Using a pattern CAUTION Risk of injury posed by breaking needles The stitch width must be adjusted to suit the presser foot. If the incorrect stitch or stitch width is selected, the needle may hit the presser foot and bend or break as a result;...

  • Page 92: Scalloped Hem

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...

  • Page 93: Stretch, Non-Stretch Blind Stitch

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 94 Utility stitches Using a pattern Iron or tack the hem before sewing. This step is required to obtain a neat seam. Lay the fabric with the wrong side facing upwards. Fold the edge of the fabric to the desired hem width. Position the fabric so that the presser foot guide fits against the edge of the...

  • Page 95: Sewing Buttonholes

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 96 Sewing buttonholes Using a pattern Select the following settings: Designation Prog. Pattern Application Presser Needle size Needle foot position Sewing Square buttonhole buttonholes for lightweight to 90 Super medium weight Stretch fabrics needles (HAx1SP) Sewing Square buttonhole buttonholes (wide) for large buttons Sewing Eyelet buttonhole for...
  • Page 97 Thread tension setting Automatic When using the buttonhole foot, always reinforce the fabric with W6 self-adhesive stabiliser or W6 decorative stabiliser on the wrong side.
  • Page 98 Sewing buttonholes Using a pattern Mark the buttonhole position and length on the fabric. a: Starting position for sewing Place the button in the holder. If the button does not fit in the holder, adjust the buttonhole foot’s attachment to the diameter of the button plus the thickness of the button.
  • Page 99 Sewing buttonholes Using a pattern Lower the buttonhole lever as far as possible. NOTE: If you do not lower the buttonhole lever properly, the indicator light will light up red and the sewing process will stop after 2 to 3 stitches. Hold the upper thread loosely and start the machine.
  • Page 100 Sewing buttonholes Using a pattern NOTE: If you press the Tie-off / Cut button before sewing starts, the machine automatically cuts the threads at the end of the seam. (The symbol is shown on the LCD display.) Carefully cut an opening in the middle of the buttonhole without cutting the stitches on either side.
  • Page 101 Sewing buttonholes Using a pattern Piped buttonhole A piped buttonhole gives dresses, costumes and coats for women a professional tailor-made touch. Cut a 2.5 cm wide piece of fabric that is 1 cm longer than the buttonhole. Tack a piece of fabric so that the centre line of the piece of fabric matches the centre line mark for the buttonhole.
  • Page 102 Sewing buttonholes Using a pattern Pull the piece of fabric through the opening onto the underside. Turn the fabric over and pull the piece of fabric so that the buttonhole is in the shape of a rectangle. Iron the piece of fabric. c.
  • Page 103 Sewing buttonholes Using a pattern Fold the fabric and topstitch along the seams on each side with spacing of just one needle width from the original seam line. Remove the tacking threads. c. Wrong side of the fabric Fold the fabric in the other direction and topstitch the triangular ends along the original seam line.

  • Page 104: Automatic Bar Tack

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 105 Automatic bar tack / Automatic darning Using a pattern Adjust the slider to the length of the bar tack. a = length of the bar tack Thread the upper thread through the opening in the buttonhole foot and leave the upper thread on the left-hand side. Place the fabric under the presser foot so the starting point is on this side.
  • Page 106 Automatic bar tack Using a pattern Lower the buttonhole lever as far as possible. NOTE: If you do not lower the buttonhole lever properly, the indicator light will light up red and the sewing process will stop after 2 to 3 stitches. Hold the upper thread loosely and start the machine.

  • Page 107: Patches / Patchwork

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 108 PLEASE NOTE The needle position must be set to centre! Failure to do this will result in damage to the W6 sewing machine parts, which are not covered by the warranty. Place the fabrics on top of each other with the right side facing each other and sew them together.

  • Page 109: Antique And Nostalgia Stitches

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...

  • Page 110: Dekorative Stitches

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 111 Thread tension setting Automatic W6 tip Place either tear-away or self-adhesive W6 stabiliser on the wrong side of the fabric for the purposes of stabilisation. Adjust the stitch width and stitch length according to the type of fabric. Use two layers of fabric.

  • Page 112: Satin Stitch

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 113 Satin stitches Using a pattern Fold the fabric with the right side facing the right side. Draw the desired curved seam on the fabric keeping a spacing of approx. 1 cm from the edge of the fabric. Sew along the pre-drawn curved seam. Using a pair of scissors, cut the end of the curve vertically.

  • Page 114: Sewing In Zippers

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 115 Sewing in zippers (centre / concealed) Using a pattern Sewing zippers in the centre Tack the fabric together with the right sides facing each other. Sew to the end of the opening. a: Upper stitch b: End of the opening c: Tacking d: Wrong side of the fabric Press the seam allowance open.
  • Page 116 Sewing in zippers (centre / concealed) Using a pattern Sew the right side of the zipper from the bottom. Sew keeping a spacing of 0.7–1.0 cm from the seam. Sew over the bottom end and the right side of the zipper. Remove the tacking threads and press it down.
  • Page 117 Sewing in zippers (centre / concealed) Using a pattern Fold over the left-hand seam allowance. Fold the right-hand seam allowance underneath it to create a 3 mm fold. Attach the zipper foot. Attach the left presser foot pin in the presser foot holder when sewing the right side of the zipper and the right presser foot pin when sewing the left side.
  • Page 118 Sewing in zippers (centre / concealed) Using a pattern Stop about 5 cm before the top end of the zipper. Remove the tacking threads and open the zipper. Sew the rest of the seam. Opening the zipper while sewing Stop the sewing machine before you get to the pull tab. Lower the needle into the fabric.

  • Page 119: Sewing With The Twin Needle

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 120 Thread the first upper thread as usual. Thread the thread in the left-hand eye of the needle from the front to the back. Press the extra spool pin with the felt washer into the hole. Attach a second spool and thread the second thread exactly like the first one. You will get better sewing results if you do not guide the thread through the needle bar thread guide.
  • Page 121 Sewing with the twin needle Using a pattern Press the Twin Needle button. The symbol for the twin needle is shown on the LCD display and the stitch width is reduced automatically. PLEASE NOTE Accident prevention. If you do not switch to twin needle mode, the needle may hit the needle plate and break.

  • Page 122: Sewing On Buttons

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 123 Sewing on buttons Using a pattern Lower the feed dogs by moving the drop feed lever to the left. Attach the button foot and align two holes on the button with the presser foot slot. Lower the foot so the button is held securely. Adjust the stitch width so that the needle stitches into the left hole of the button.
  • Page 124 Sewing on buttons Using a pattern Lift the presser foot and cut off the remaining threads to a length of approx. 10 cm. Pull the lower thread to bring the upper thread to the left-hand side of the fabric and knot the threads. After sewing, move the drop feed lever to the right and turn the hand wheel forwards (towards you) five times (the feed dogs are up again).

  • Page 125: Sewing Decorative Stitches And Letters

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 126 Sewing decorative stitches and letters Using a pattern This machine has 108 decorative patterns and 3 types of letter patterns. Please see inside the top cover. You can combine them easily. Selecting decorative and letter patterns Press the Decorative / Letter Stitch button on the Start screen. Four Group Selection buttons appear on the screen.
  • Page 127 Sewing decorative stitches and letters Using a pattern D. Contour letters Pressing the [ ] or [ ] button in the bottom right-hand corner will display the next or previous screen. There are four screens. Pressing the [A/a] button will display the upper case and lower case screen alternately.
  • Page 128 Sewing decorative stitches and letters Using a pattern Checking selected patterns As the sequence becomes longer and longer, patterns disappear from the screen’s display area. You can check the patterns by moving the cursor up using the Cursor buttons. Press the Cursor Up button and the cursor moves up. The cursor position is highlighted.
  • Page 129 Sewing decorative stitches and letters Using a pattern When the cursor reaches the bottom of the screen, the next pattern that is no longer visible is displayed again. When the cursor reaches the bottom end of the sequences, the highlighting symbol changes to the I symbol.
  • Page 130 Sewing decorative stitches and letters Using a pattern Deleting a pattern Move the cursor to the pattern you want to delete. Press the Clear button. The machine deletes the pattern and the cursor moves to the next pattern. If the cursor is at the bottom, the machine deletes just before the pattern.
  • Page 131 Sewing decorative stitches and letters Using a pattern If you want to delete all patterns, press and hold the Clear button (longer than 0.5 sec.). The machine deletes all the selected patterns. Editing individual patterns You can change the settings (mirror / rotate, stretch and stitch width / length) for individual patterns.
  • Page 132 Sewing decorative stitches and letters Using a pattern By pressing the Screen Change buttons A, B, C, you can change the settings as follows. Button B does not appear if mirror / rotate, stretch is not available for the selected pattern. You can return to the selection mode by pressing the Return button.
  • Page 133 Sewing decorative stitches and letters Using a pattern Tie-off / cut function If you switch this function on by pressing the Tie-off / Cut ( ) button, the machine will sew tie-off stitches at the end of the sequences and cut the threads. The tie-off and cut symbol appears in the second row on the left of the screen.
  • Page 134 Sewing decorative stitches and letters Using a pattern B. Mirroring / rotating and stretching Press the for Mirror / Rotate, Stretch button. By pressing the A, C button, you can change the Settings screen. Mirror / rotate You can sew the pattern in the mirror / rotate mode. If you move the cursor when the Mirror / Rotate button appears, you can sew this pattern in the mirror / rotate mode.
  • Page 135 , the needle position and the width / length at the top. You can return to the selection mode by pressing the Return button. PLEASE NOTE The W6 factory tension setting is ideal. If the seam appearance is not ideal, the W6 machine is usually threaded incorrectly in 95% of all cases!
  • Page 136 Sewing decorative stitches and letters Using a pattern Recalling selected patterns If you change the pattern to a utility stitch, the machine will remember the stitch sequences until the machine is switched off. Press the Decorative / Letter Stitch button to recall these patterns. The machine recalls the selected patterns.
  • Page 137 Sewing decorative stitches and letters Using a pattern Embroidery design / Real-time preview of patterns You can check the embroidery design on the screen. Open the group selection screen. Pressing the button on the Stitch Settings screen will display the Group Selection screen.
  • Page 138 Sewing decorative stitches and letters Using a pattern You can check all the patterns by pressing the Cursor buttons. Pressing the Embroidery button again returns the screen to the normal image. You can now start sewing the embroidery pattern on the screen. In this case, the machine starts sewing from the cursor position.
  • Page 139 Sewing decorative stitches and letters Using a pattern Saving selected patterns You can save the selected stitch sequences in the memory. There are four separate memory folders to save stitch sequences. The saved patterns remain stored when you switch the machine off. Press the Save button once you have selected patterns.
  • Page 140 Sewing decorative stitches and letters Using a pattern Accessing saved patterns Press the Memory button on the Start screen. The saved patterns are displayed in the File button. Press the File button you want. The selected button is highlighted. Press the Read Memory button. The recalled embroidery pattern is displayed on the left-hand side of the screen.
  • Page 141 Sewing decorative stitches and letters Using a pattern Sewing selected patterns Attach the satin stitch foot to sew decorative and letter stitches. The machine starts sewing from the highlighted pattern. You have to move the cursor to the pattern you want to sew. (When the cursor is displayed with the “–”...
  • Page 142 Sewing decorative stitches and letters Using a pattern A. Single mode (preset when storing letters or at least 2 decorative patterns.) The ( ) symbol is shown on the LCD display. The machine stops automatically once the selected patterns have been sewn once. B.
  • Page 143 Sewing decorative stitches and letters Using a pattern TIPS For immediate tie-off. Stop the sewing process and press the Reverse button. When you resume sewing, the machine automatically sews a tie-off stitch. For tie-off after one complete pattern. Press the Reverse button while sewing a stored pattern. The machine sews the complete pattern and ties off afterwards.
  • Page 144 NOTE: Remove the extension table before selecting the following settings. A) First check that the W6 machine has really been threaded correctly. B) To sew the best embroidery design, you must always place W6 stabiliser under the fabric. C) The forward and reverse stitches may need to be adjusted to suit the type of fabric you are sewing.

  • Page 145: Darning / Freehand Embroidery

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 146 Sewing decorative stitches and letters Using a pattern Select the following settings: Designation Prog. Pattern Application Presser Needle size Needle foot position Darning / Darning / Freehand Freehand embroidery 90 Super embroidery Stretch needles (HAx1SP) Thread tension setting Automatic Attaching the presser foot Lower the feed dogs by moving the drop feed lever to the left.
  • Page 147 Sewing decorative stitches and letters Using a pattern Tighten the presser foot’s slotted screw. Darning Place the fabric under the foot and lower it. Hold the fabric in front of and behind the area to be darned. Operate the machine by moving the fabric back and forth evenly by hand and topstitching in close rows across the hole or worn area.
  • Page 148 Note: An embroidery frame is not included with this machine. You can purchase the freehand embroidery frame on the W6 website under Accessories. Slide the embroidery frame under the needle and lower the foot. Start the machine at medium speed and guide the frame carefully so that the...

  • Page 149: Appliqués / Appliqué

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 150 Sew reinforcing stitches at the end of the seam. W6 tip: A thin W6 decorative stabiliser helps you to keep the position of the stitches along the appliqué more accurate. This can then be removed easily. If necessary, reduce the adjustable foot pressure to 1 to make sewing round corners easier.

  • Page 151: Quilting Bar

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...

  • Page 152: Walking Foot

    In the event of any lack of clarity: watch the Optimal Threading video that • is just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead •...
  • Page 153 Walking foot Using a pattern Push the presser foot lever up. Using the screwdriver, loosen the slotted screw on the presser foot holder. Push the presser foot lever up. Remove the presser foot holder and the presser foot. Push the presser foot lever up again.
  • Page 154 Walking foot Using a pattern Push the walking foot from left to right onto the presser bar. Make sure that the walking foot’s arm is on the needle clamp’s shaft. Attach the presser foot using the screw. Hold the upper thread gently when starting to sew and sew slowly.

  • Page 155: Narrow Hems

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 156 Narrow hems Using a pattern Insert the needle into the crease by turning the hand wheel toward you and lower the presser foot. Sew several stitches and raise the presser foot. Insert the fabric pleat into the spiral-shaped opening on the rolled hem foot. Move the fabric backwards and forwards until the fold is in the shape of a roll.

  • Page 157: Sewing On Cords

    In the event of any lack of clarity: watch the Optimal Threading video that is • just 4 minutes long on the W6 website under Service / Help / W6 N 8000 Exklusive. 95% of all errors occur during threading. Failure to do this will always lead to •...
  • Page 158 Select pattern no. 14. and set the stitch width to 6.0–7.0. Insert the three cords into the slots on the cording foot. W6 tip: Alternatively, you can select a decorative stitch that covers two cords in terms of stitch width.

  • Page 159: Maintenance

    For all other customers we recommend an inspection interval of 2 to 4 years be maintained. You can book the inspection at a fixed price on the W6 website yourself. The fixed price includes labour costs, spare parts and shipping costs.

  • Page 160: Maintenance To Be Carried Out By The Customer

    If the needle plate is severely damaged by needle strikes, it must be replaced. You can order a new needle plate from our W6 Wertarbeit online shop (Spare Parts category). The following illustration shows an example of a severely damaged needle plate that must be replaced.

  • Page 161: Cleaning The Hook, Hook Race And Feed Dogs

    NOTE: On this machine the sewing area is illuminated with an LED light. If it is • not working, please contact W6. The machine does not need to be lubricated. • If the machine becomes dirty, soak a cloth in a small amount of mild •...
  • Page 162 Maintenance to be carried out by the customer Maintenance Remove the needle plate by lifting the right side. Lift out the bobbin holder (b). c: Thread cutter Clean the hook (d), feed dogs and bobbin holder. Clean with a soft, dry cloth. Insert the bobbin holder back into the hook race so the tip (e) fits into the stop (f) as shown.

  • Page 163: Checking The Hook System For Damage

    Carry out the following steps: Remove the hook race. Clean and remove any pieces of thread and sewing dust from this area using a W6 cleaning brush. You can also carefully clean the hook system using a vacuum cleaner. Check the black hook race carrier for needle strikes or damage.

  • Page 164: Checking The Hook Race For Damage

    Minor needle strikes on the hook race can be removed carefully using fine emery paper (for example 800 grit). If the hook race is severely damaged by needle strikes, it must be replaced. You can order a new hook race from our W6 Wertarbeit online shop (Spare Parts category).

  • Page 165: Disposal

    Maintenance to be carried out by the customer Maintenance 12.3 Disposal It is not permitted for this product to be disposed of using the normal household waste at the end of its service life. It must be handed in at a collection point for the recycling of electrical and electronic devices.

  • Page 166: Error Messages

    Troubleshooting Error messages Message 1. Wind the bobbin. 2. Lower the buttonhole lever. 3. After sewing the buttonhole, raise the presser foot lifter and move the buttonhole foot attachment to the start position. 4. Release the foot pedal. 5. Lower the presser foot. 6.
  • Page 167 19. System error. The winder switch in the machine is defective. (Contact W6 customer service) Lower threads have got caught in the bobbin winder spindle during winding. 20. System error. (Contact W6 customer service) Overload protection. Was the material being sewn maybe too thick? Has the machine jammed?

  • Page 169: Technical Data

    Key data The sewing machine’s key data Type Sewing machine Model W6 N 8000 Exklusive The sewing machine is intended for domestic use only. Other use or use in excess of the intended rating does not comply. 14.2 Technical data...

  • Page 170: Eu Declaration Of Conformity

    EU Declaration of Conformity Technical data 14.3 EU Declaration of Conformity EU Declaration of Conformity As soon as this machine has been altered in a material way this declaration becomes null and void. A new conformity process in accordance with the EU Low Voltage Directive is then required.

  • Page 171: Service Information

    • Contact us directly by e-mail at info@w6-wertarbeit.de. W6 WERTARBEIT also offers the following options on its website for free. Please access our website using www.w6-naehmaschinen.de and under HELP select: Criteria for the optimal threading of a W6 N 8000 Exklusive video.
  • Page 173 Checking the hook race for damage............173 Checking the hook system for damage...........172 Checking the needle..................48 Checking the needle / Why using W6 needles is important....168 Checking the needle plate...............168 Cleaning the hook, hook race and feed dogs..........170 Connecting the machine..............12, 24 Darning / Freehand embroidery...............152...
  • Page 174 Narrow hems....................162 Needle and thread table................50 Needle Up / Down / Slow Sewing button...........33 Notes for operational safety.................8 Operating elements..................31 Overcasting / overlock................93 Overview of patterns..................74 Patches / Patchwork.................111 Presser foot lifter..................34 Quilting bar....................158 Quilting stitches..................87 Rear view....................22 Recalling selected patterns..............143 Removing the bobbin.................53 Removing the extension table..............23 Reverse button...................32...
  • Page 175 Using the upper thread to pull up the lower thread......58, 65 Utility stitch selection..................38 View of the presser foot, automatic needle threader and needle plate..19 Walking foot....................159 What do I do with the upper thread?............60 What we expect from you................10 Why use W6 bobbins?................53 Winding the bobbin..................54 Zigzag stitch....................88...
  • Page 176 “Help” on our www.w6-wertarbeit.de website. You will also find many helpful videos on instructions, threading and applications. We also offer you useful and tested original accessories for sewing on www.w6- wertarbeit.de. An inspection performed at regular intervals will result in quiet operating characteristics and nice seams.

Table of Contents