Page 2
Please read the manual and the safety instructions carefully before operating the machine. W6 Tip Subscribing to the W6 newsletter will help you stay up to date on new products and information as well as enable you to take advantage of special offers and deals! Enjoy your new sewing machine.
• Before commencing any work with the device, it is crucial that you read the information and instructions provided below. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
• W6 WERTARBEIT offers frequent sewers an annual inspection (at the owner’s expense). Normal use requires regular inspections to be performed every two to four years. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Frequent sewers should send the overlocker in for an annual inspection, while an inspection every 2 to 4 years should be sufficient for normal use. To do so, contact W6 WERTARBEIT directly by email: info@w6-wertar- beit.com. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
A tutorial video made specifically for the W6 N 656D Free Arm. • • Tips and tricks for the W6 N 656D Free Arm. • A visual selection of stitches and their use. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Should you wish to dispose of it, do not simply throw the packaging material away but send it for recycling. » The overlocker has been unpacked Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Do not plug the power plug into the socket with wet hands. ► Do not pull the power plug from the socket by the power cable. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 11
Press the spool holder up to the housing of the overlocker and slide it to the right as far as the stop. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 12
Plug the ‹machine plug› into the socket on the overlocker. Plug the ‹power plug› into the power socket. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 13
» o p e r a t i o n . W6 Tip The waste bin is only installed once the four threads have been threaded. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
• you exchange the needle or thread; the covers are removed; • a power failure occurs during use; in the event of a storm. • Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Hand wheel Differential feed dial Stitch length dial Spool holder Spool centring (only for large spools) Spool pin Side view Components of the overlocker - Side view Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Lever for switching to rolled hem Electrical connections Electrical connections Parts of the overlocker Designation On and off switch Jack for the power supply and foot controller Power plug Foot controller Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Thread directly from the thread guide bar through the left and right circular holes of the special thread guide. ATTENTION: Please don‘t thread the decorative yarn through the metal plates. Use the special thread guide instead. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Brush Needle threader Allen key, small Tweezers Looper cover Accessory bag Spool centring device (4x) Cover, folded Waste bin (to be placed below the overlock machine) Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Setting the seam width by removing the left-hand needle (page� 28) • Setting the differential feed dial (page� 30) • Hand wheel (page� 31) On and off switch On and off switch on the overlocker Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Jack for the power supply and foot controller Operating elements Jack for the power supply and foot controller Jack for the power supply and foot controller Power plug Power plug Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Removing the extension table To re-attach the extension table, carefully slide the extension table in the opposite direction until it engages. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
► The front cover is closed. Chaining finger The changing finger is used to sew normal overlock seams as well as rolled hems. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 25
Slide the seam width finger switch to R if you wish to sew rolled hems. Make sure to slide the switch towards the “R” marking up to the stop. » The switch is set in the correct position Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
The upper thread tension is set by means of the ‹dials›. In normal use, the thread tension is to be set to 4. This setting will generally allow you to achive good result when sewing. Thread tension dials Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
To sew rolled hems, set the stitch length dial to the symbol (vertical line) between 1 and 2. Setting the stitch length dial to sew rolled hems. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Open the front cover. Bring the upper knife to the rest position. See "Adjusting the upper knife“ > "Bringing the upper knife to the rest position“ (page 41). Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
If the loops are too close to being beyond the edge of the fabric, turn the cutting position dial anti-clockwise (to the left). The lower knife moves to the left, see illustration (C). Ideal cutting width Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
N is the neutral Fabric (chino, setting. No denim) stretching or gathering occurs. Light-weight From 0.6 to N fabrics (The fabric is gath- (Silk, knitwear) ered) Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Hand wheel Operating elements 5.13 Hand wheel ‹hand wheel› must always only be turned forward towards the nose, in other words, anti-clockwise. Turn the hand wheel Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Always take care to select the correct presser foot. Please follow the steps below: forwards (towards you), until the needles are in the Turn the ‹hand wheel› top-most position. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 33
‹presser foot› from ‹presser foot holder›. ▼ The presser foot is released from the holder automatically when the lever is pressed. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 34
Slide it slightly forwards or backwards accordingly. Check whether the presser foot has engaged by lifting the presser foot lifter. » The presser foot has been changed Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 35
Changing the presser foot Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Worn or damaged needles can break and damage the overlocker. There is a risk of injury posed by uncontrolled moving parts. ► Change worn or damaged needles. Checking the needle. Top: straight; bottom: bent Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Always change the needle in accordance with the instructions provided in ► this manual. Please follow the steps below: forwards (towards you), until the needles are in the Turn the ‹hand wheel› top-most position. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
The overlocker sews using two needles. One for the “orange” and one for the “blue” thread. As the procedure for the removal is identical, it is described here only once. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 39
Al . ways change the needle in accordance with the instructions provided in this manual. Please follow the steps below: Turn the ‹hand wheel› forwards (towards you), until the needle is in the top-most position. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 40
Slide the new needle directly upwards into the needle holder up to the stop. Tighten the needle clamp by means of the Allen key. » The needle has been inserted Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Never use this overlock without the upper knife function. The fabric might collide the upper or lower looper and damage the machine. This is not a warranty claim. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
(towards you) until it locks vertically in the working position. » The upper knife is in the working position Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Open the front cover, see "Operating elements“ > "Opening and closing the front cover“ (page 24) Slide the small bolt of the looper cover into the hole at the tip of the upper looper. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Open the front cover, see "Operating elements“ > "Opening and closing the front cover“ (page 24) Pull the looper cover off the upper looper. » The looper cover has been removed. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
10.1 Diagram of the 4 thread paths The illustration below shows the threading diagram of the four threads. Details regarding the individual thread paths are provided in the text below. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
4. ORANGE thread path, in order to create the correct pattern. The following illustration provides an overview of the thread path. The 1st thread must pass through threading positions 1 to 8 in sequence. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 47
At threading position 1, pull the red thread from the rear through the sec- ond hole from the right of the thread guide. At threading position 2, guide the red thread under the small metal Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 48
At threading position 4, guide the red thread through the left-hand clip of the two metal guiding clips. At threading position 5, guide the red thread through the first quick- threading eye marked with red and green dots. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 49
At threading position 6, guide the red thread - as described under point 5 - through the second quick-threading eye marked with red and green dots. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 50
Turn the hand wheel forwards (towards you) until the hole at the tip of the upper looper at the rear is clearly visible. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 51
Please access our website using www.w6-wertarbeit.eu and select “Help” / W6 N 656D Free Arm Criteria for the optimal threading of a W6 N 656D Free Arm“ (4 min. video). Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
1 to 6 and 8 in sequence. After that the green thread must pass through threading position 7. Threading the green thread (B) | Diagram Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 53
When doing so, keep the green thread taut and pull it from the right to the left beneath the small metal plate until it engages audibly. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 54
At threading position 5, guide the green thread through the first quick- threading eye marked with red and green dots. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 55
At threading position 6, guide the green thread - as described under point 5 - through the second quick-threading eye marked with red and green dots. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 56
Use the built-in threading aid for the concealed threading position 7. Before using the threading aid for the concealed threading position 7, switch the chaining finger from N to R. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 57
(Picture 11) (Picture 11) Place the green thread at a slight angle from the left on the V-shaped notch of the threading aid. (Picture 12) (Picture 12) Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 58
Please access our website using www.w6-wertarbeit.eu and select “Help” / W6 N 656D Free Arm Criteria for the optimal threading of a W6 N 656D Free Arm“ (4 min. video). Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
The following illustration provides an overview of the thread path. The 3rd thread must pass through threading positions 1 to 9 in sequence. Threading the blue thread (B) | Diagram Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 60
When doing so, keep the blue thread taut and pull it from the right to the left beneath the small metal plate until it engages audibly. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 61
At threading position 4, guide the blue thread around the protruding met- al plate towards threading position 5 (left). At threading position 5, guide the blue thread through the rear slit of the two metal notches. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 62
At threading position 6, guide the blue thread upwards through the slit of the vertical metal rail. At threading position 7, guide the blue thread through the right-hand side of the metal spiral. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 63
Threading Guide the blue thread to threading position 8 and pull it from left to right through the thread guide clip on the outer right-hand side. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 64
Please access our website using www.w6-wertarbeit.eu and select “Help” / W6 N 656D Free Arm Criteria for the optimal threading of a W6 N 656D Free Arm“ (4 min. video). Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
The following illustration provides an overview of the thread path. The 4th thread must pass through threading positions 1 to 9 in sequence. Threading the orange thread (B) | Diagram Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 66
When doing so, keep the orange thread taut and pull it from the right to the left beneath the small metal plate until it engages audibly. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 67
At threading position 4, guide the orange thread around the protruding metal plate towards threading position 5. At threading position 5, guide the orange thread through the front slit of the metal plate. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 68
At threading position 6, guide the orange thread upwards through the slit of the vertical metal rail. At threading position 7, guide the orange thread through the left-hand side of the metal spiral. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 69
4. ORANGE thread path (threading the left needle) Threading Guide the orange thread to threading position 8 and pull it from left to right through the thread guide clip on the left-hand side. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 70
Please access our website using www.w6- wertarbeit.eu and select “Help” / W6 N 656D Free Arm Criteria for the optimal threading of a W6 N 656D Free Arm“ (4 min. video). Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
‹hand wheel› forwards (towards you), until the needles are in the top-most position. Lower the presser foot completely by setting the ‹presser foot lifter› the top-most position. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 72
W6 WERTARBEIT also offers a helpful video for the threading process on its website for free. Please access our website using www.w6-wertarbeit.eu and select Help / W6 N 656D Free Arm : Optimal threading (4 min. video) Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
• Fresh thread is ready for use. Please follow the steps below: Cut the threads close to the spools. Place fresh spools on the spool holder. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 74
Cheap, low-quality threads can cause problems during sewing. We therefore recommend that you use thread tension-friendly and lint-free W6 WERTARBEIT thread, available in more than four-hundred different colours. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
The knives jam? Most often this is caused by fabric residues between the knives. Clean the knives with tweezers and a ► brush. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 76
Sew a run-off chain approximately 7 cm long. Place the fabric under the presser foot from the front and sew a test seam. » The fabric has been chained off. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Knot the run-off chain that has been sewn directly behind the fabric. Pull the remaining run-off chain into the seam with a thick darning needle. » Sewing of the seam has ended Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 78
Ending the seam Chaining off | Finishing a seam Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Please keep in mind that fabric quality may vary. As a result, you might need to adjust the settings for each pattern slightly. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Suitable for sewing on or garments, shirts, inserting lace or fine tucks. summer garments or delicate girls’ garments. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 81
Double-thread seams use less thread. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 82
The deco- rative flat seam is created by pulling apart the two edges of the fabric. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 83
Please follow the steps below: Place the two left-hand sides of the fabric together. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 84
Unfold the two parts of the fabric and pull apart the two edges of the seam that lie on top of each other. A flat stitch is created. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Please remember that not all parts of the W6 overlocker are accessable to you. If a W6 overlocker has been used very frequently, then the fluff and dust deposits must be removed regularly. Should you notice the your seams no longer appear flawless even after...
/ lower looper, the feed dogs and knife areas. Use a dry brush for this purpose. Remove dust and lint W6 Tip A W6 fluff brush that is perfectly suited for this task is available as a special accessory. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Oil the lubrication points of the upper looper, the knife areas as well as other moving metal parts indicated in the drawing below regularly. Lubrication points that are to be oiled regularly Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Place the new upper knife in the groove of the knife carrier and fasten by means of the screw. » The moving upper knife has been exchanged. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Kindly contact your local authorities for information regarding the appropriate disposal centre. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
> "Inserting a needle“ (page 38). When sewing thicker fabrics, use three instead of four threads and remove the left-hand needle. Increase the stitch length and cutting width. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 91
> "Inserting a needle“ (page 38). seam Check whether the thread has become entan- gled in the thread path. Check the threading. See "Threading“ (page 45). Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Check the quality of the thread by pulling strongly on the thread with the thumb nail and index finger nail. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Use only W6 WERTARBEIT ELx705 size 80 needles for this overlocker. An unsuitable or damaged needle may lead to skipped stitches and damage your needle plate, the foot and the lower / upper looper. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
The following illustration shows an example of a severely damaged needle plate that must be exchanged. Severely damaged needle plate Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
1300 stitches per minute ELx705 size: 90/14 80/12 Needle system Needle bar stroke 27 mm Presser foot stroke 4.5 mm Number of needles 1, 2 Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 96
In order to ensure that you will always have access to the latest developments in sewing technology, W6 WERTARBEIT reserves the right to change the design, construction and accessories of the device at any time. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
This declaration shall become null and void immediately once any material change is made in the overlocker. A new conformity evaluation process in accordance with the EU Low Voltage Directive will then be required. Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
– After that select “Service / Guarantee Regis- tration”. W6 Tip Subscribing to the W6 newsletter will help you stay up to date on new products and infromation as well as enable you to take advantage of special offers and deals! Please enjoy your new sewing machine.
Page 99
Service information Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 100
Tips for a longer service life ......7 Mains voltage ..........10 Troubleshooting ..........90 Maintenance ..........85 Tweezers ............20 Movable upper knife ........17 Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 101
Upper knife ........... 20 Upper looper (red thread path) ....18 Waste bin (to be placed below the overlock machine) ......... 20 What we expect from you ....... 8 Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR...
Page 102
W6 WERTARBEIT also offers high quality sewing-accessories online. W6 Tip Subscribing to the W6 newsletter will help you stay up to date on new products and information as well as enable you to take advantage of special offers and deals! Please enjoy your new sewing machine.