Frequently Asked Questions - Philips Sonicare ExpertClean 7300 Manual

24
English
3 Remove the protective screen in front of the UV light bulb.
To remove the screen, grasp the edges next to the snaps, gently
squeeze and pull out the protective screen.
4 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of the metal clasp.
5 Clean the protective screen and the UV light bulb with a damp cloth.
6 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the light bulb with the
metal clasp and push the bulb into the clasp.
7 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen with the slots on
the reflective surface near the UV light bulb. Push the screen straight
into the slots on the sanitizer.

Frequently asked questions

Question
Can I leave my Sonicare on the
charger between brushings?
Will other brush heads fit my
Philips Sonicare toothbrush?
Answer
Yes, you can always keep your
Philips Sonicare toothbrush on a
plugged-in charger. This will not
affect the battery lifetime.
All Philips Sonicare electric
toothbrush brush heads that snap
on will fit your toothbrush.
However, not all can be used for
BrushSync technology. You can
identify the brush heads with
BrushSync technology by the icon
at the base of the brush head.