Table of Contents
Advertisement
Once the mode selected, the keys of the various parameters activate or deactivate each option.
A green check shows that the parameter is included in the research. If there is no green check, the param-
eter will not be taken into account for the research.
Attention: The more you select options, the longer is the research.
10.1
Terrestrial mode
This mode allows automatic research on the terrestrial frequency band.
The table allows the selection of:
•
Standards
•
Channel widths
•
The channel range of the research
(i.e. 21 to 60).
The goal is to make researches shorter
by defining at best the settings
(example: in France, DVB-T, 8MHz,
channels 21 to 60)
10.2
Satellite mode
This mode allows automatic research on the satellite frequency band.
The table allows the selection of:
•
LNB bands
•
LNB polarisations.
The goal is to make researches shorter again
10.3
Cable Mode
This mode allows automatic research on the cable frequency band.
The table allows the selection of:
•
Standards
•
Channel widths
•
The search range of channels
Active research parameter
Inactive research parameter
p.
46
Advertisement
Table of Contents
