Updating Satellites; Instruction For Use - Triax MCT 049B User Manual

8.2

Updating satellites

You can update frequencies of the checks sat :
manually on your device
or
by importing the configuration posted on the TRIAX website.
All you have to do is to copy this file on a USB stick and go to "Configuration" and then "Import"
We advise you to check and to update your frequencies every three months
8.3

Instruction for use

Procedure:
1/ Connect the satellite dish to the appliance and start it up.
2/ Validate the remote power supply:
VDC lights up.
-
- Check the power supply current of the LNB (IDC at the top right corner of the screen should be
between 50 and 200 mA).
Remote power supply / LNB – DiSEqC
See chapter
3/ On the Home page, go to the Check Sat mode.
Select the satellite to aim at in the list (example ASTRA1)
4/ Slowly orientate the satellite dish until hearing the locking melody and getting the best quality.
5/ Slightly turn the LNB to get the best quality (counter-polarization).
You will hear a melody as soon as a first transponder is detected; then, you will hear beeps. These beeps
are closer and closer as the quality increases.
p.
38