Checking The Aligned Satellite - Triax MCT 049B User Manual

If the appliance is not synchronized on all four transponders, the quality indication is red.
If the appliance is synchronized on all four transponders but the reception quality is aver-
age, the quality indication is orange.
Good reception quality (> 50%) → green smiley
Attention:
To identify a satellite, it must be synchronized on all
However, some transponders are regularly modified.
See the frequency map of the satellite if a transponder does not seem to work.
Some switches or LNB work only with DiSEqC commands. In this case, position the OL
and the polarization on DiSEqC in the Configuration page LNB-DiSEqC.
(Attention: the Check Sat is slower with DiSEqC commands).
8.4

Checking the aligned satellite

To check if you have aimed the right satellite, press the NIT key.
The appliance searches the MPEG NIT table on one of the 4 transponders and displays the name of the
satellite:
4 transponders
p.
39
.