Positioning - Russell Hobbs RHPH7001 Manual

• If the plug has to be changed because it is not suitable for your socket, or
becomes damaged in any way, it should be cut off and an appropriate
plug fitted. This should be carried out by a qualified electrician. The plug
removed must be disposed of safely, as insertion into a 13 Amp socket is
likely to cause an electrical hazard.

Positioning

• The heater can be positioned in the upright position (Control panel
is at the top):
• WARNING: There must be at least 30cm clearance from the base of
the heater to the ground.
• WARNING: There must be at least 50cm clearance between the
sides of the heater and any object, including walls.
• This heater will heat up to 10m
SAFETY INSTRUCTIONS
2 room