Russell Hobbs RHPH7001 Manual page 10

USING YOUR PLUG HEATER
Safety Protective Devices
The appliance is fitted with an over heat protection system
• Overheat protection - the power to the heating elements
will automatically cut off if the temperature of the heating
elements exceeds a certain limit. In the event of
overheating, the heater will stop operating. Switch the
appliance off and allow it to completely cool.
Note: Overheating can be caused by obstruction to the air
intakes on the back of the machine or the grill on the front. If
this occurs please disconnect the machine and allow it to cool
for 30 minutes. Remove any obstruction and turn the
machine back on.