Special Product Features - LaserLiner SmartLine-Laser 360 Manual

Hide thumbs Also See for SmartLine-Laser 360:
Table of Contents

Advertisement

Available languages

Available languages

– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.
– In public areas shield off the laser beam with barriers and partitions wherever possible and identify
the laser area with warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limits in
accordance with the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity
of people with pacemakers – may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.

Special product features

Automatic alignment of the device with a magnetically dampened pendulum system.
The device is brought into initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum lock during transport.
RX­READY technology enables line lasers to be used even in unfavourable light
conditions.The laser lines pulsate at a high frequency and this can be picked up
by special laser receiversover long distances.
Number and direction of the lasers
H = horizontal laser
V = vertical laser
S = slope function
!
When transporting always switch off all lasers, secure the pendulum and set the slide switch
to „OFF"!
SmartLine-Laser 360
1H 1V
S
09
EN

Advertisement

Table of Contents
loading

Table of Contents