General Safety Instructions - LaserLiner SmartLine-Laser 360 Manual

Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Automatic laser with horizontal 360° laser circle, vertical line and slope function
– The horizontal laser line creates a continuous 360° laser line with the vertical lines
aligned perpendicular to it. Ideal for almost any alignment job.
– Individually switchable laser lines
– Out­Of­Level: is indicated by optical signals when the unit is outside its self­levelling range.
– Additional slope function to align angled surfaces

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the scope of the
specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
Do not stare into the beam!
Class 2 laser < 1 mW · 635 nm
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
08
EN
Laser radiation!
EN 60825­1:2014