Satel ATELLINE-M3-TR3 Integration Manual page 53

RadioProperty SL@R?
Radio Property SL@S?
RadioProperty SL@S=x
Radio Property SL&P?
Radio Property SL&P=n
Reset SL@X=n
Get RSSI (Received Signal Strength
Indication) of last received
message (dBm)
Get radio compatibility mode
Set radio compatibility mode.
Value of x is:
0 = SATELLINE-3AS
1 = PacCrest-4FSK (Option1)
2 = PacCrest-GMSK (Option2)
3 = Trimtalk450s(P) (Option 3, RX
fits PacCrest modems)
4 = Trimtalk450s(T) (Option 4, RX
fits Trimble modems)
5 = PacCrest-FST (Option5)
6 = SATELLINE-2ASxE
20 = 8FSK FEC OFF (TR4 only)
21 = 8FSK FEC ON (TR4 only)
22 = 16FSK FEC ON (TR4 only)
23 = PacCrest-4FSK FEC Off
(Scrambler On)
24 = PacCrest-GMSK FEC Off
(Scrambler On)
26 = PacCrest-4FSK FEC Off
Scrambler Off
27 = PacCrest-GMSK FEC Off
Scrambler Off
28 = PacCrest-4FSK FEC On
Scrambler Off
29 = PacCrest-GMSK FEC On
Scrambler Off
Get TX/RX priority.
Set TX/RX priority. Value of n:
1 = TX priority
2 = RX priority
Reset command. Values of n are:
"9" Reset modem
52
SATELLINE-M3-TR3,
–TR4 and -R4
Integration Guide, Version 3.0
"-nnn dBm", nnn is a
decimal value of field
strength between –80 dBm
and –118 dBm.
Value is available 7 s after
reception, after that the
response is "<-118 dBm".
SATELLINE-3AS Epic
returns the stronger value
of two transceivers.
decimal number. See list
on lower left
decimal number
1 = TX priority
2 = RX priority
OK or ERROR
"OK" or "ERROR", then
modem resets required
blocks.