Setting The Humidity Level; Switching The Operation Mode; Using The Light Dimming Function; Switching The Display Mode - Philips AC2721 User Manual

Setting the humidity
level
1
Touch the humidity button
repeatedly to set the desired air
humidity to 40%, 50%, 60% or "
(fig. s).
Note
•
When the humidity level "
chosen, the appliance will keep
humidifying the room until the
ambient humidity level reaches
70%RH.
Note
•
When the target humidity level is
reached, the wick wheel will stop
rotating. It will start rotating again
when the humidity drops below the
target level.
•
If you want to increase the humidity
level quickly, you can select a
higher fan speed.
Switching the operation
mode
The appliance has two operation
modes, the purification ONLY mode and
the 2-in-1 mode.
1
Touch the mode selection button
to switch to the purification ONLY
mode (fig. t).
» displays on the screen when
the appliance operates in the
purification ONLY mode.
2
Touch the mode selection button
again to switch to the 2-in-1 mode
(fig. u).
»
» The current humidity level
"
Note
•
The screen will display humidity
level for 3 seonds and change to
display the highest level of IAI or
" is
PM2.5 if one of which is not good.
Using the light dimming
function
With the light dimming button, you can
switch on or off the air quality light,
the display screen and the function
indicator if desired.
1
Touch the light dimming button
dimmed.
2
Touch the light dimming button
again, the air quality light and the
display panel will be turned off.
3
Touch the light dimming button
for the third time, all lights will be on
again.
Switching the display
mode
The appliance has three display modes,
PM2.5 display, IAI display and humidity
level display.
Note
•
The appliance operates in IAI
display mode by default.
1
Touch and hold
switch to PM2.5 display (fig. v).
displays on the screen when
the appliance operates in the
2-in-1 mode.
displays on the screen by
default.
once, the air quality light will be
for 3 seconds to
EN
9