Table of Contents
Advertisement
Throttle Duty Cycle : When the system enters Doze mode, the CPU clock runs only part
of the time. You may select the percent of time that the clock runs.
PCI/VGA Act-Monitor : When Enabled, any video activity restarts the global timer for
Standby mode. The default setting is "Disabled".
PowerOn by Ring : When "Enabled", an input signal on the serial Ring Indicator (RI) line
awakens the system from soft off state.
IRQ8 Clock Event : You can turn On or Off monitoring of IRQ8 (the Real Time Clock) so
it does not awaken the system from Suspend mode.
Reload Global Timer Events : When Enabled, an event occurring on each device listed
below restarts the global time for Standby mode.
IRQ [3-7, 9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
After you have made your selection in the POWER MANAGEMENT SETUP, press the
<ESC> key to go back to the main program screen.
Downloaded from StockCheck.com
AP-687VF/F 45
AWARD BIOS SETUP
Advertisement
Table of Contents
