Table of Contents
Advertisement
2.2 I
NSTALLING AND
To upgrade to a higher power Pentium II or Pentium III CPU, simply remove the old
CPU and install to a new one; be sure to set the jumpers for the new CPU type and
speed.
Disconnect the power cord from your system when you intend to
work on it or you plan to open the chassis of your IPC. Do not
make connections when the power is turned on because the
sensitive electronic components could been damaged by the
sudden rush of power. Please only allow experienced electronic
technicians to do this job.
STATIC ELECTRICITY PRECAUTION!
Caution! Computer components are very sensitive to damage
from static electric discharge. Always ground yourself to remove
static charge build-up before touching the boards in the computer.
Use a grounding wrist strap at all time.
components on the anti-static pad for static-dissipation or in a
static-shielded bag when they are not in the chassis.
Danger of Explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the battery
manufacturer's instructions.
Downloaded from StockCheck.com
U
PGRADING THE
WARNING!
CAUTION!
AP-687VF/F 5
JUMPER SETTING AND CONNECTORS
CPU
Place all electronic
Advertisement
Table of Contents
