Chipset Features Setup - Lanner electronics AP-687VF Manual

Single board computer for slot 1 processor

Hide thumbs

Table Of Contents

Table of Contents

AWARD BIOS SETUP

go back to the main program screen.

3.5 C

HIPSET

EATURES

When you select the "CHIPSET FEATURES SETUP" on the main program, the screen

display will appears as:

Chipset Features Setup Screen

AUTO Configuration

EDO DRAM Speed Selection : 60 ns

EDO CASx# MA Wait State

EDO RASx# Wait State

SDRAM RAS-to-CAS Delay

SDRAM RAS Precharge Time : 3

SDRAM CAS latency Time

SDRAM Precharge Control

DRAM Data Integrity Mode

System BIOS Cacheable

Video BIOS Cacheable

Video RAM Cacheable

8 Bit I /O Recovery Time

16 Bit I /O Recovery Time

Memory Hole At 15M-16M

Passive Release

Delayed Transaction

AGP Aperture Size (MB)

Auto Configuration : The default setting is "Enabled" which will optimize DRAM timing

automatically depending on whether the DRAM used is either 70ns or 60ns. The other

option is "Disabled" which allows you to change DRAM timing manually.

EDO DRAM Speed Selection : The value in this field must correspond to the speed of

the DRAM installed in your system. DO NOT change the default setting of this field, as

Downloaded from StockCheck.com

ETUP

ROM PCI / ISA BIOS (2A69KL79)