Cuckoo CRP-Q10 Series Operating Instructions Manual page 13

How to double check whether the packing is well assembled
3
Since a badly assembled packing can cause the rice to be half-cooked or burned by steam leakage, double check
the packing thoroughly as described below.
① Visual inspection
Normal
assembly
(look for parts sticking out of the inner)
Abnormal
assembly
② Physical inspection
• Check if the pressure packing is thoroughly
put into the groove by rubbing the inside rime
of the packing with a finger around the entire
circumference as shown in the picture above.
③ Water boiling test
• Pour water in the Inner Pot up to water level 2 (for "Rice") and press the Menu/Selection button to select the self-cleaning mode.
Then push the Pressure Cook/Turbo button.
• Within 10 minutes, the pressure regulator weight will start rattling and hissing while emitting stream. If there is no steam coming out from the
pot other than through the pressure regulator weight the packing has been properly installed.
• If steam comes out from other parts, stop the test and pull out the power cord. Wait until the pot cools down before removing the pressure
packing from the lid. Once reinstalled repeat the boiling test.
• For a more precise water boiling test, you can wrap plastic around the circumference of the closed Top Cover. By doing so, you can easily
check where the steam leakage is.
Normal
assembly
• If you still have a problem with reassembling the packing, please contact our Customer Service.
HOW TO CLEAN
check the entire circumference carefully for any crack or damage between
•
the Inner Pot lid and the pressure packing.
(look for parts sticking out of outer rim)
• Check if the pressure packing is properly put
into the groove of the Inner Pot lid by pushing
the outer rim with a finger around the entire
circumference as shown in the picture.
Abnormal
assembly
(look for parts sticking out of damaged parts)
• Check if the pressure packing is thoroughly
put into the groove by pushing the inside of
the rim packing with a finger around the entire
circumference as shown in the picture.
13