Installing The Software; Installing The Scanning Utility - Canon IMAGEFORMULA CR-190I Instructions Manual

Installing the Software

The following software applications are provided on the setup disc that
is packaged with the scanner. Make sure to open and read the
Readme.txt file on the setup disc before installing the software.
Scanning Utility
Canon Scanning Utility is an application that provides scanning, file
saving, image viewing, printing, and various other functions. A
dedicated scanner driver is installed after you install the utility
software.
Ranger
Ranger is an API software. For details, see "About the Ranger," on
p. 27.
IMPORTANT
• The Scanning Utility includes a device driver so that Windows can
recognize the CR-190i. Be sure to install the Scanning Utility before
connecting the CR-190i to the computer.
• Some functions mentioned in this manual may not be operated in some
applications.

Installing the Scanning Utility

Follow the instructions below to install the Scanning Utility and the
dedicated driver.
NOTE
The dedicated scanner driver is installed after the Scanning Utility has been
installed.
Turn ON your computer, and log on to Windows.
IMPORTANT
Be sure to log on as the Administrator.
Insert the setup disc into the CD-ROM drive.
This manual assumes that "D" is assigned to your CD-ROM drive.
Click [Start], and then click [All Programs].
The procedure in Windows XP/7 is different from the ones
described in this manual. Refer to the Windows XP/7 "Help and
Support Center" to select [Run].
19