Devolo MAGIC 2 LAN triple Manual page 34

Standby
If Standby mode
devolo Magic 2 LAN triple automatically switches
to Standby mode if no Ethernet connection has
been enabled, i.e. if no network device (e.g. com-
puter) is switched on and connected to the net-
work interface and if Wi-Fi is disabled.
In this mode, the devolo Magic 2 LAN triple is not
accessible over the Powerline network. As soon as
the network device (e.g. computer) connected to
the network interface is switched on again, your
adapter can also be accessed again over the
electrical wiring.
Standby mode is
devolo Magic 2 LAN triple factory default settings.
For information about the LED behavior of
the devolo Magic adapter in standby mode,
refer to Chapter 2.2.2 Reading the PLC in-
dicator light.
Time server
Under Time server, you can select your current
time zone. The Time server (NTP) option lets you
specify a time server.
A time server is a server on the Internet whose task
consists of providing the exact time. Most time
is enabled, the
servers are coupled with a radio clock.
The
switches between standard and daylight saving
time.
Firmware update
The firmware of the devolo Magic 2 LAN triple in-
enabled in the
cludes the software for operating the device. As
necessary, for example to modify existing functi-
ons, devolo provides new versions on the Internet
as a downloadable file.
Network configuration 34
devolo Magic 2 LAN triple
devolo Magic 2 LAN triple
automatically