Devolo MAGIC 2 LAN triple Manual page 16

LED Behavior
3 Red LED Solid on
4 Red and Flashing at in-
white tervals of 0.1
LED sec. red/2 sec.
white
Meaning
Status 1:
The other network nodes are in standby mo-
de, so they cannot currently be accessed
over the electrical wiring. The PLC LEDs on
the other devolo Magic adapters flash white
only for a short time.
Status 2:
The connection to the other network nodes
has been interrupted. There may be electro-
magnetic or radio frequency interference on
the power line. In this case, put the
devolo Magic adapters closer to each other
or try to shut off the source of interference.
Data transmission rate not in optimum
range **
Introduction 16
LED status display
(web interface*)
Can be disabled
Can be disabled
devolo Magic 2 LAN triple