Using The Scan To E-Mail Feature - Canon ImageCLASS MF4690 Instructions Manual

Using the Scan to E-Mail
Feature
To set up and use the Scan to E-Mail feature, you need to make settings based on the flow below.
Setting up the E-Mail Send Feature (→ P. 9)
Using the Remote UI, you make settings to send e-mails.
Setting up the E-Mail Reception Feature (→ P. 28)
You make settings to receive e-mails.
If you want to use the Scan to E-mail feature only, you don't need to make this setting.
Registering E-Mail Addresses (→ P. 2)
Using the Remote UI, you register the e-mail addresses.
Test Sending an E-Mail (→ P. 25)
You send an e-mail to a registered address for testing the feature.
The setup is completed.
8