E-Mail Configuration - LG NC1000 Manual

Usage of each item on SuperSign Manager Software

E-mail Configuration

Log report can be sent by e-mail if you follow the procedure as below.
1) To set e-mail configuration, select 'File menu>Option>Management' as shown.
E-mail configuration menu
2) Pop-up window appears. Input an e-mail address and outgoing mail server in 'Admin email' and 'SMTP Server' textbox
respectively.
3) If SMTP Server needs user authentication, Input user ID and password in the corresponding fields, then click 'OK' button.
(SPA or SSL encryption is not supported.)
4) After mandatory fields are completed, click the button, 'Test email'.
5) Click 'OK' button in the below of the pop-up window, then check if you receive a test mail.
E-mail configuration window
6) As shown, click 'Send an email' button in Log report window in order to send an e-mail with the log file.
Log report window
34