Cable Connection Procedure Of The Product - LG NC1000 Manual

Composition of SuperSign

Cable connection procedure of the product

Connect using D-SUB input cable (Check monitor RGB input)
A
LINE-OUT Cable should be connected for Audio output during D-SUB connection
Power Cable
B
RS-232C Cable
C
Provided RS-232C cable is to connect the SuperSign to the monitor.
HDMI Cable (Check monitor HDMI input)
D
* When connecting a HDMI device
1) Connection for audio output is not necessary as HDMI terminal outputs both audio and video.
2) Select Start > Control Panel > Sounds and Audio Devices > Audio.
3) Select Sound playback > NVIDIA High Definition Audio, then click on 'OK' button.
*When Removing a HDMI device
1) Select Start > Control Panel > Sounds and Audio Devices > Audio.
2) Select Sound playback > Realtek HD Audio output, then click on 'OK' button.
3) Sound is not output if speaker is not set as default after removing the HDMI cable.
4) Programs currently running have to be closed and restarted for sound to be output normally.
LINE-OUT Cable
E
LAN Cable
F
1
* After switching on the power switch and pushing the SuperSign power button, light of the SuperSign
power button turns to green and the power is on.
Please set the SET ID of the display connected Player to 1.
NOTE
Display Device whitch does not use LG RS23C Protocol can not be controlled and monitored
on SuperSign Manager
Power Cable
RS-232C Cable
2
HDMI Cable
D-SUB Cable
3 4
7
LINE-OUT Cable
LAN Cable
Using D-SUB: A, B, C, E, F
Using HDMI: B, C, D, F