Table of Contents
Advertisement
20
Reset ID
•
This feature initializes the Set ID of the product.
•
After execution, the Set IDs of all monitor in the RS-232C daisy chain are reset to 1.
(This feature may not be available with some models.)
NOTE
•
Be sure to execute Auto Set ID/Reset ID when Picture ID is set to Off.
Configuration Setup
•
This feature enables a detailed configuration of the product.
Installation Menu (V 3.0)
LG Digital Signage Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
Configuration Setup
Lock Mode
External Speaker / Audio out
Fail Over
ISM Method
Easy Brightness Control
S/W : xx.xx.xx.xx Micom : x.xx.x
Splash Offset Time
•
This feature controls the amount of time a splash image is displayed.
•
You can select a time between 0 and 10 seconds.
U SB Auto Playback
•
This is a feature that automatically plays video or photo files from your USB storage device.
•
This feature is activated when you connect a USB device to your monitor or when you turn on your monitor with a
USB device connected to it.
•
Video and photo files must be located in the root folder, in the first partition of your USB storage device.
•
Video or photo files located here will play back repeatedly.
NOTE
•
Contents stored on the USB storage device connected to USB 1 are played back if USB storage devices are connected
to both USB 1 and USB 2.
OK
Configuration Setup
Splash Offset Time
USB Auto Playback
15Min Auto Off
Automatic Standby
Screen Saver Cube
Previous
+0 sec
Disable
Disable
Off
Yes
OK
Advertisement
Table of Contents
