Usage of each item on SuperSign Manager Software
Tile Mode Control Cable
2
1
1. Tile mode can be configured when several monitors are connected to one SuperSign
2. Connect 'RS232C Out' of SuperSign to 'RS232C In' of the monitor.
1
3. For connection between monitors, connect 'RS232C In' and 'RS232C Out' as shown in
2
4. To set the Tile Mode, you must separately purchase the RS-232C cable.
NOTE
·To set the Tile Mode, you must set unique Set ID in each Monitor OSD Menu ( Set ID: 1 ~ 25)
28