To Control Multiple Products; Cable Connection - LG CVCA Owner's Manual

To Control Multiple Products

• The following method applies only to some models.
You can connect multiple products to a single PC by using this method. You can connect multiple products
to a single PC and control them at the same time.
In the General menu, non-repeated values between 1 and 1000 must be assigned as the set ID.

Cable Connection

• The image may vary according to the model.
Connect the RS-232C cable as in the figure.
The RS-232C protocol is used for communication between a PC and the product. It controls the power of
the product, selects an input source in a PC, or controls the OSD menu.
Monitor 4
RS-232C RS-232C
OUT IN
Monitor 1
PC
RS-232C cable (optional)
Monitor 3 Monitor 2
RS-232C RS-232C RS-232C
OUT IN OUT
4P cable (optional)
Monitor 2
Monitor 1
RS-232C RS-232C RS-232C
IN OUT IN
Monitor 3
PC
RS-232C Cable
RS-232C
(optional)
Gender
Monitor 4
15