LG Minibeam Nano PV150G Owner's Manual page 131

Hide thumbs Also See for Minibeam Nano PV150G:
Table of Contents

Advertisement

Available languages

Available languages

34
USING THE PROJECTOR
If you do not intend to use the projector for a long time, leave the battery charged
at 40 % to 50 %.
The battery is automatically recharged when the projector is connected to a
power supply.
Charge the battery fully when you first use the projector.
The battery standard usage time given in the manual is based on measurements
taken by LG; the actual time may vary depending upon usage.
Battery usage time may vary depending on broadcast type, operating
temperature, period of use, and user preferences.
As the battery is consumable, its lifetime gradually decreases. When the battery's
life is reduced by half, replace it with a new battery from an LG Electronics
customer center.
Do not charge the battery using any equipment other than that supplied with the
product. This may damage the battery or cause a fire.
Always use a battery that is approved and certified by LG Electronics, Inc. Failure
to do so may result in an explosion or fire.
If the battery is leaking or giving off an odor, discontinue its use immediately and
contact LG Electronics Customer Support Center.
The battery contains lithium-ion, so please handle with care. Failure to do so may
result in an explosion or fire.

Advertisement

Table of Contents
loading

Table of Contents